Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_23_Drawing.jpg
Series_23_TA.png

3/32" Dia, 3 Flute, Tapered Square End Mill - 32351

SERIES: 23S

General Application End Mill

3/32" Dia, 1/2" LOC, 1/4" Shank Dia, 3 Flute, 28 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 23S, Tapered Square End Mill - 32351


SKU / EDP32351
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series23S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationTapered (Square)
Tool LengthRegular
Unit (inch/mm)inch
Number of Flutes3
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.0938
Cutting Diameter (DC) (Fractional Inch)3/32
Cutting Diameter (DC) (mm)2.38
Shank Diameter (DCON) (Decimal Inch)0.2500
Shank Diameter (DCON) (Fractional Inch)1/4
Shank Diameter (DCON) (mm)6.35
Length of Cut (APMX) (Decimal Inch)0.5000
Length of Cut (APMX) (Fractional Inch)1/2
Length of Cut (APMX) (mm)12.70
Overall Length (LF) (Decimal Inch)3.0000
Overall Length (LF) (Fractional Inch)3
Overall Length (LF) (mm)76.20
Shank Length (LS) (Decimal Inch)2.5000
Shank Length (LS) (Fractional Inch)2-1/2
Shank Length (LS) (mm)63.50
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Side ProfileLinear Taper
Helix AngleRight Spiral
Helix Angle (Degree)28
Variable HelixNo
Center CuttingYes
Chip BreakerNo
Centerline (α) Angle (Degree)10.0

Alternative Products SKU / EDP to 32351
Series_23_TC.png

3/32" Dia, 3 Flute, Tapered Square End Mill - 32314

SGS 3/32" Dia, 1/2" LOC, 1/4" Shank Dia, 3 Flute, 28 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 23S, Tapered Square End Mill - 32314

Series_23_TN.png

3/32" Dia, 3 Flute, Tapered Square End Mill - 32376

SGS 3/32" Dia, 1/2" LOC, 1/4" Shank Dia, 3 Flute, 28 Degree Helix, Ti-NAMITE (TiN) Coated, Series 23S, Tapered Square End Mill - 32376

Series_23_UN.jpg

3/32" Dia, 3 Flute, Tapered Square End Mill - 32313

SGS 3/32" Dia, 1/2" LOC, 1/4" Shank Dia, 3 Flute, 28 Degree Helix, Uncoated, Series 23S, Tapered Square End Mill - 32313

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.