Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_23_Drawing.jpg
Series_23_UN.jpg

1/8" Dia, 3 Flute, Tapered Square End Mill - 32323

SERIES: 23S

General Application End Mill

1/8" Dia, 1-1/2" LOC, 3/8" Shank Dia, 3 Flute, 28 Degree Helix, Uncoated, Series 23S, Tapered Square End Mill - 32323


SKU / EDP32323
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series23S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationTapered (Square)
Tool LengthRegular
Unit (inch/mm)inch
Number of Flutes3
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.1250
Cutting Diameter (DC) (Fractional Inch)1/8
Cutting Diameter (DC) (mm)3.18
Shank Diameter (DCON) (Decimal Inch)0.3750
Shank Diameter (DCON) (Fractional Inch)3/8
Shank Diameter (DCON) (mm)9.53
Length of Cut (APMX) (Decimal Inch)1.5000
Length of Cut (APMX) (Fractional Inch)1-1/2
Length of Cut (APMX) (mm)38.10
Overall Length (LF) (Decimal Inch)3.5000
Overall Length (LF) (Fractional Inch)3-1/2
Overall Length (LF) (mm)88.90
Shank Length (LS) (Decimal Inch)2.0000
Shank Length (LS) (Fractional Inch)2
Shank Length (LS) (mm)50.80
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Side ProfileLinear Taper
Helix AngleRight Spiral
Helix Angle (Degree)28
Variable HelixNo
Center CuttingYes
Chip BreakerNo
Centerline (α) Angle (Degree)5.0

Alternative Products SKU / EDP to 32323
Series_23_TA.png

1/8" Dia, 3 Flute, Tapered Square End Mill - 32356

SGS 1/8" Dia, 1-1/2" LOC, 3/8" Shank Dia, 3 Flute, 28 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 23S, Tapered Square End Mill - 32356

Series_23_TC.png

1/8" Dia, 3 Flute, Tapered Square End Mill - 32324

SGS 1/8" Dia, 1-1/2" LOC, 3/8" Shank Dia, 3 Flute, 28 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 23S, Tapered Square End Mill - 32324

Series_23_TN.png

1/8" Dia, 3 Flute, Tapered Square End Mill - 32381

SGS 1/8" Dia, 1-1/2" LOC, 3/8" Shank Dia, 3 Flute, 28 Degree Helix, Ti-NAMITE (TiN) Coated, Series 23S, Tapered Square End Mill - 32381

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.