Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_59B_59MB_Drawing.jpg
Series_59B_TC.png

1/4" Dia, 2 Flute, Ball Nose End Mill - 32292

SERIES: 59B

General Application End Mill

1/4" Dia, 5/8" LOC, 1/4" Shank Dia, 2 Flute, 25 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 59B, Ball Nose End Mill - 32292


SKU / EDP32292
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series59B
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationBall Nose
Tool LengthRegular
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.2500
Cutting Diameter (DC) (Fractional Inch)1/4
Cutting Diameter (DC) (mm)6.35
Shank Diameter (DCON) (Decimal Inch)0.2500
Shank Diameter (DCON) (Fractional Inch)1/4
Shank Diameter (DCON) (mm)6.35
Length of Cut (APMX) (Decimal Inch)0.6250
Length of Cut (APMX) (Fractional Inch)5/8
Length of Cut (APMX) (mm)15.88
Overall Length (LF) (Decimal Inch)3.5000
Overall Length (LF) (Fractional Inch)3-1/2
Overall Length (LF) (mm)88.90
Shank Length (LS) (Decimal Inch)2.8750
Shank Length (LS) (Fractional Inch)2-7/8
Shank Length (LS) (mm)73.03
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiCN (Ti-NAMITE-C)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)25
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 32292
Series_59B_TA.png

1/4" Dia, 2 Flute, Ball Nose End Mill - 32202

SGS 1/4" Dia, 5/8" LOC, 1/4" Shank Dia, 2 Flute, 25 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 59B, Ball Nose End Mill - 32202

Series_59B_TN.png

1/4" Dia, 2 Flute, Ball Nose End Mill - 32212

SGS 1/4" Dia, 5/8" LOC, 1/4" Shank Dia, 2 Flute, 25 Degree Helix, Ti-NAMITE (TiN) Coated, Series 59B, Ball Nose End Mill - 32212

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.