Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_59B_59MB_Drawing.jpg
Series_59B_TA.png

1/2" Dia, 2 Flute, Ball Nose End Mill - 32205

SERIES: 59B

General Application End Mill

1/2" Dia, 1" LOC, 1/2" Shank Dia, 2 Flute, 25 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 59B, Ball Nose End Mill - 32205


SKU / EDP32205
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series59B
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationBall Nose
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.5000
Cutting Diameter (DC) (Fractional Inch)1/2
Cutting Diameter (DC) (mm)12.70
Shank Diameter (DCON) (Decimal Inch)0.5000
Shank Diameter (DCON) (Fractional Inch)1/2
Shank Diameter (DCON) (mm)12.70
Length of Cut (APMX) (Decimal Inch)1.0000
Length of Cut (APMX) (Fractional Inch)1
Length of Cut (APMX) (mm)25.40
Overall Length (LF) (Decimal Inch)4.5000
Overall Length (LF) (Fractional Inch)4-1/2
Overall Length (LF) (mm)114.30
Shank Length (LS) (Decimal Inch)3.5000
Shank Length (LS) (Fractional Inch)3-1/2
Shank Length (LS) (mm)88.90
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)25
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 32205
Series_59B_TC.png

1/2" Dia, 2 Flute, Ball Nose End Mill - 32295

SGS 1/2" Dia, 1" LOC, 1/2" Shank Dia, 2 Flute, 25 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 59B, Ball Nose End Mill - 32295

Series_59B_TN.png

1/2" Dia, 2 Flute, Ball Nose End Mill - 32215

SGS 1/2" Dia, 1" LOC, 1/2" Shank Dia, 2 Flute, 25 Degree Helix, Ti-NAMITE (TiN) Coated, Series 59B, Ball Nose End Mill - 32215

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.