Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_44_45_Logo.jpg
Series_44_44M_Drawing.jpg
Series_44_TB.jpg
Series_44_45_Logo_Vector.eps

3/8" Dia, 2 Flute, Square End End Mill - 32038

SERIES: 44S

Ski-Carb

3/8" Dia, 1-1/2" LOC, 3/8" Shank Dia, 2 Flute, 45 Degree Helix, Uncoated, Series 44S, Ski-Carb, Square End End Mill - 32038

Feature & Benefits

  • Polished ski land with primary and secondary flute wall design minimizes chip interference by directing chips away from secondary flute
  • Circular land allows for increased control at various speed and feed rates ultimately reducing chatter
  • Recommended for materials ≤ 150 Bhn (≤ 7 HRc)

SKU / EDP32038
CategorySolid Round Tools > Milling > High Performance Aluminum End Mills
Min Order Qty1
Series44S
Series DescriptionSki-Carb
High PerformanceYes
End ConfigurationSquare End
Tool LengthLong
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(N) Non-Ferrous Materials
Secondary Workpiece MaterialPlastics & Composites
Cutting Diameter (DC) (Decimal Inch)0.3750
Cutting Diameter (DC) (Fractional Inch)3/8
Cutting Diameter (DC) (mm)9.53
Shank Diameter (DCON) (Decimal Inch)0.3750
Shank Diameter (DCON) (Fractional Inch)3/8
Shank Diameter (DCON) (mm)9.53
Length of Cut (APMX) (Decimal Inch)1.5000
Length of Cut (APMX) (Fractional Inch)1-1/2
Length of Cut (APMX) (mm)38.10
Overall Length (LF) (Decimal Inch)3.2500
Overall Length (LF) (Fractional Inch)3-1/4
Overall Length (LF) (mm)82.55
Shank Length (LS) (Decimal Inch)1.7500
Shank Length (LS) (Fractional Inch)1-3/4
Shank Length (LS) (mm)44.45
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.00035
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.009
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)45
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 32038
Series_44_TB.jpg

3/8" Dia, 2 Flute, Square End End Mill - 32058

SGS 3/8" Dia, 1-1/2" LOC, 3/8" Shank Dia, 2 Flute, 45 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 44S, Ski-Carb, Square End End Mill - 32058

Series_44_TB.jpg

3/8" Dia, 2 Flute, Square End End Mill - 34512

SGS 3/8" Dia, 1-1/2" LOC, 3/8" Shank Dia, 2 Flute, 45 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 44S, Ski-Carb, Square End End Mill - 34512

Series_44_TB.jpg

3/8" Dia, 2 Flute, Square End End Mill - 34511

SGS 3/8" Dia, 1-1/2" LOC, 3/8" Shank Dia, 2 Flute, 45 Degree Helix, Uncoated, Series 44S, Ski-Carb, Square End End Mill - 34511

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.