Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_3_3M_Drawing.jpg
Series_3EL_TC.png

5/8" Dia, 2 Flute, Square End End Mill - 31955

SERIES: E3S

General Application End Mill

5/8" Dia, 3" LOC, 5/8" Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series E3S, Square End End Mill - 31955


SKU / EDP31955
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
SeriesE3S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthExtra Long
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.6250
Cutting Diameter (DC) (Fractional Inch)5/8
Cutting Diameter (DC) (mm)15.88
Shank Diameter (DCON) (Decimal Inch)0.6250
Shank Diameter (DCON) (Fractional Inch)5/8
Shank Diameter (DCON) (mm)15.88
Length of Cut (APMX) (Decimal Inch)3.0000
Length of Cut (APMX) (Fractional Inch)3
Length of Cut (APMX) (mm)76.20
Overall Length (LF) (Decimal Inch)6.0000
Overall Length (LF) (Fractional Inch)6
Overall Length (LF) (mm)152.40
Shank Length (LS) (Decimal Inch)2.3250
Shank Length (LS) (mm)59.06
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiCN (Ti-NAMITE-C)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 31955
Series_3EL_TA.png

5/8" Dia, 2 Flute, Square End End Mill - 31965

SGS 5/8" Dia, 3" LOC, 5/8" Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series E3S, Square End End Mill - 31965

Series_3EL_TN.png

5/8" Dia, 2 Flute, Square End End Mill - 31945

SGS 5/8" Dia, 3" LOC, 5/8" Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series E3S, Square End End Mill - 31945

Series_3EL_UN.jpg

5/8" Dia, 2 Flute, Square End End Mill - 33333

SGS 5/8" Dia, 3" LOC, 5/8" Shank Dia, 2 Flute, 30 Degree Helix, Uncoated, Series E3S, Square End End Mill - 33333

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.