Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_3_3M_Drawing.jpg
Series_3EL_TC.png

5/16" Dia, 2 Flute, Square End End Mill - 31951

SERIES: E3S

General Application End Mill

5/16" Dia, 1-5/8" LOC, 5/16" Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series E3S, Square End End Mill - 31951


SKU / EDP31951
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
SeriesE3S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthExtra Long
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.3125
Cutting Diameter (DC) (Fractional Inch)5/16
Cutting Diameter (DC) (mm)7.94
Shank Diameter (DCON) (Decimal Inch)0.3125
Shank Diameter (DCON) (Fractional Inch)5/16
Shank Diameter (DCON) (mm)7.94
Length of Cut (APMX) (Decimal Inch)1.6250
Length of Cut (APMX) (Fractional Inch)1-5/8
Length of Cut (APMX) (mm)41.28
Overall Length (LF) (Decimal Inch)4.0000
Overall Length (LF) (Fractional Inch)4
Overall Length (LF) (mm)101.60
Shank Length (LS) (Decimal Inch)2.3750
Shank Length (LS) (Fractional Inch)2-3/8
Shank Length (LS) (mm)60.33
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiCN (Ti-NAMITE-C)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 31951
Series_3EL_TA.png

5/16" Dia, 2 Flute, Square End End Mill - 31961

SGS 5/16" Dia, 1-5/8" LOC, 5/16" Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series E3S, Square End End Mill - 31961

Series_3EL_TN.png

5/16" Dia, 2 Flute, Square End End Mill - 31941

SGS 5/16" Dia, 1-5/8" LOC, 5/16" Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series E3S, Square End End Mill - 31941

Series_3EL_UN.jpg

5/16" Dia, 2 Flute, Square End End Mill - 33325

SGS 5/16" Dia, 1-5/8" LOC, 5/16" Shank Dia, 2 Flute, 30 Degree Helix, Uncoated, Series E3S, Square End End Mill - 33325

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.