Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_1B_1MB_Drawing.jpg
Series_1ELB_LB_TA.png

3/8" Dia, 4 Flute, Ball Nose End Mill - 31932

SERIES: E1B

General Application End Mill

3/8" Dia, 1-3/4" LOC, 3/8" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series E1B, Ball Nose End Mill - 31932


SKU / EDP31932
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
SeriesE1B
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationBall Nose
Tool LengthExtra Long
Unit (inch/mm)inch
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.3750
Cutting Diameter (DC) (Fractional Inch)3/8
Cutting Diameter (DC) (mm)9.53
Shank Diameter (DCON) (Decimal Inch)0.3750
Shank Diameter (DCON) (Fractional Inch)3/8
Shank Diameter (DCON) (mm)9.53
Length of Cut (APMX) (Decimal Inch)1.7500
Length of Cut (APMX) (Fractional Inch)1-3/4
Length of Cut (APMX) (mm)44.45
Overall Length (LF) (Decimal Inch)4.0000
Overall Length (LF) (Fractional Inch)4
Overall Length (LF) (mm)101.60
Shank Length (LS) (Decimal Inch)2.2500
Shank Length (LS) (Fractional Inch)2-1/4
Shank Length (LS) (mm)57.15
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 31932
Series_1ELB_LB_TC.png

3/8" Dia, 4 Flute, Ball Nose End Mill - 31922

SGS 3/8" Dia, 1-3/4" LOC, 3/8" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series E1B, Ball Nose End Mill - 31922

Series_1ELB_LB_TN.png

3/8" Dia, 4 Flute, Ball Nose End Mill - 31908

SGS 3/8" Dia, 1-3/4" LOC, 3/8" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series E1B, Ball Nose End Mill - 31908

Series_1ELB_UN.jpg

3/8" Dia, 4 Flute, Ball Nose End Mill - 33128

SGS 3/8" Dia, 1-3/4" LOC, 3/8" Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series E1B, Ball Nose End Mill - 33128

Series_1ELB_UN.jpg

3/8" Dia, 4 Flute, Ball Nose End Mill - 93343

SGS 3/8" Dia, 1-3/4" LOC, 3/8" Shank Dia, 4 Flute, 30 Degree Helix, Amorphous Diamond Coated, Series E1B, Ball Nose End Mill - 93343

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.