Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_15B_15MB_Drawing.jpg
Series_15B_UN.jpg

7/16" Dia, 2 Flute, Ball Nose End Mill - 31538

SERIES: 15B

General Application End Mill - Double-End

7/16" Dia, 0.5620" LOC, 7/16" Shank Dia, 2 Flute, 35 Degree Helix, Uncoated, Series 15B, Double-End, Ball Nose End Mill - 31538


SKU / EDP31538
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series15B
Series DescriptionGeneral Application End Mill - Double-End
High PerformanceNo
End ConfigurationBall Nose
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.4375
Cutting Diameter (DC) (Fractional Inch)7/16
Cutting Diameter (DC) (mm)11.11
Shank Diameter (DCON) (Decimal Inch)0.4375
Shank Diameter (DCON) (Fractional Inch)7/16
Shank Diameter (DCON) (mm)11.11
Length of Cut (APMX) (Decimal Inch)0.5620
Length of Cut (APMX) (mm)14.27
Overall Length (LF) (Decimal Inch)2.7500
Overall Length (LF) (Fractional Inch)2-3/4
Overall Length (LF) (mm)69.85
Shank Length (LS) (Decimal Inch)2.1880
Shank Length (LS) (mm)55.58
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)35
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 31538
Series_15B_TA.png

7/16" Dia, 2 Flute, Ball Nose End Mill - 31355

SGS 7/16" Dia, 0.5620" LOC, 7/16" Shank Dia, 2 Flute, 35 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 15B, Double-End, Ball Nose End Mill - 31355

Series_15B_TC.png

7/16" Dia, 2 Flute, Ball Nose End Mill - 39688

SGS 7/16" Dia, 0.5620" LOC, 7/16" Shank Dia, 2 Flute, 35 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 15B, Double-End, Ball Nose End Mill - 39688

Series_15B_TN.png

7/16" Dia, 2 Flute, Ball Nose End Mill - 31578

SGS 7/16" Dia, 0.5620" LOC, 7/16" Shank Dia, 2 Flute, 35 Degree Helix, Ti-NAMITE (TiN) Coated, Series 15B, Double-End, Ball Nose End Mill - 31578

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.