Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_14_14M_Drawing.jpg
Series_14S_TN.png

9/64" Dia, 4 Flute, Square End End Mill - 31455

SERIES: 14S

General Application End Mill - Double-End

9/64" Dia, 0.3120" LOC, 3/16" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 14S, Double-End, Square End End Mill - 31455


SKU / EDP31455
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series14S
Series DescriptionGeneral Application End Mill - Double-End
High PerformanceNo
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.1406
Cutting Diameter (DC) (Fractional Inch)9/64
Cutting Diameter (DC) (mm)3.57
Shank Diameter (DCON) (Decimal Inch)0.1875
Shank Diameter (DCON) (Fractional Inch)3/16
Shank Diameter (DCON) (mm)4.76
Length of Cut (APMX) (Decimal Inch)0.3120
Length of Cut (APMX) (mm)7.92
Overall Length (LF) (Decimal Inch)2.0000
Overall Length (LF) (Fractional Inch)2
Overall Length (LF) (mm)50.80
Shank Length (LS) (Decimal Inch)1.6880
Shank Length (LS) (mm)42.88
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiN (Ti-NAMITE)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 31455
Series_14S_TA.png

9/64" Dia, 4 Flute, Square End End Mill - 31177

SGS 9/64" Dia, 0.3120" LOC, 3/16" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 14S, Double-End, Square End End Mill - 31177

Series_14S_TC.png

9/64" Dia, 4 Flute, Square End End Mill - 39615

SGS 9/64" Dia, 0.3120" LOC, 3/16" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 14S, Double-End, Square End End Mill - 39615

Series_14_UN.jpg

9/64" Dia, 4 Flute, Square End End Mill - 31415

SGS 9/64" Dia, 0.3120" LOC, 3/16" Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series 14S, Double-End, Square End End Mill - 31415

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.