Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_16_16M_Drawing.jpg
Series_16_TC.png

5/32" Dia, 4 Flute, Square End End Mill - 31241

SERIES: 16S

General Application End Mill

5/32" Dia, 0.3120" LOC, 3/16" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 16S, Square End End Mill - 31241


SKU / EDP31241
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series16S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.1562
Cutting Diameter (DC) (Fractional Inch)5/32
Cutting Diameter (DC) (mm)3.97
Shank Diameter (DCON) (Decimal Inch)0.1875
Shank Diameter (DCON) (Fractional Inch)3/16
Shank Diameter (DCON) (mm)4.76
Length of Cut (APMX) (Decimal Inch)0.3120
Length of Cut (APMX) (mm)7.92
Overall Length (LF) (Decimal Inch)2.0000
Overall Length (LF) (Fractional Inch)2
Overall Length (LF) (mm)50.80
Shank Length (LS) (Decimal Inch)1.6880
Shank Length (LS) (mm)42.88
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiCN (Ti-NAMITE-C)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 31241
Series_14S_TA.png

5/32" Dia, 4 Flute, Square End End Mill - 31178

SGS 5/32" Dia, 0.3120" LOC, 3/16" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 14S, Double-End, Square End End Mill - 31178

Series_14S_TN.png

5/32" Dia, 4 Flute, Square End End Mill - 31457

SGS 5/32" Dia, 0.3120" LOC, 3/16" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 14S, Double-End, Square End End Mill - 31457

Series_14_UN.jpg

5/32" Dia, 4 Flute, Square End End Mill - 31417

SGS 5/32" Dia, 0.3120" LOC, 3/16" Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series 14S, Double-End, Square End End Mill - 31417

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.