Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_5B_5MB_Drawing.jpg
Series_5B_UN.jpg

11/64" Dia, 3 Flute, Ball Nose End Mill - 30522

SERIES: 05B

General Application End Mill

11/64" Dia, 5/8" LOC, 3/16" Shank Dia, 3 Flute, 30 Degree Helix, Uncoated, Series 05B, Ball Nose End Mill - 30522


SKU / EDP30522
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series05B
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationBall Nose
Tool LengthLong
Unit (inch/mm)inch
Number of Flutes3
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.1719
Cutting Diameter (DC) (Fractional Inch)11/64
Cutting Diameter (DC) (mm)4.37
Shank Diameter (DCON) (Decimal Inch)0.1875
Shank Diameter (DCON) (Fractional Inch)3/16
Shank Diameter (DCON) (mm)4.76
Length of Cut (APMX) (Decimal Inch)0.6250
Length of Cut (APMX) (Fractional Inch)5/8
Length of Cut (APMX) (mm)15.88
Overall Length (LF) (Decimal Inch)2.0000
Overall Length (LF) (Fractional Inch)2
Overall Length (LF) (mm)50.80
Shank Length (LS) (Decimal Inch)1.3750
Shank Length (LS) (Fractional Inch)1-3/8
Shank Length (LS) (mm)34.93
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 30522
Series_5B_TA.png

11/64" Dia, 3 Flute, Ball Nose End Mill - 31140

SGS 11/64" Dia, 5/8" LOC, 3/16" Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 05B, Ball Nose End Mill - 31140

Series_5B_TC.png

11/64" Dia, 3 Flute, Ball Nose End Mill - 30910

SGS 11/64" Dia, 5/8" LOC, 3/16" Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 05B, Ball Nose End Mill - 30910

Series_5B_TN.png

11/64" Dia, 3 Flute, Ball Nose End Mill - 30861

SGS 11/64" Dia, 5/8" LOC, 3/16" Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 05B, Ball Nose End Mill - 30861

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.