Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_5_5M_Drawing.jpg
Series_5_UN.jpg

3/64" Dia, 3 Flute, Square End End Mill - 30505

SERIES: 05S

General Application End Mill

3/64" Dia, 0.1090" LOC, 1/8" Shank Dia, 3 Flute, 30 Degree Helix, Uncoated, Series 05S, Square End End Mill - 30505


SKU / EDP30505
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series05S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthRegular
Unit (inch/mm)inch
Number of Flutes3
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.0469
Cutting Diameter (DC) (Fractional Inch)3/64
Cutting Diameter (DC) (mm)1.19
Shank Diameter (DCON) (Decimal Inch)0.1250
Shank Diameter (DCON) (Fractional Inch)1/8
Shank Diameter (DCON) (mm)3.18
Length of Cut (APMX) (Decimal Inch)0.1090
Length of Cut (APMX) (mm)2.77
Overall Length (LF) (Decimal Inch)1.5000
Overall Length (LF) (Fractional Inch)1-1/2
Overall Length (LF) (mm)38.10
Shank Length (LS) (Decimal Inch)1.3910
Shank Length (LS) (mm)35.33
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 30505
Series_5S_TA.png

3/64" Dia, 3 Flute, Square End End Mill - 30813

SGS 3/64" Dia, 0.1090" LOC, 1/8" Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 05S, Square End End Mill - 30813

Series_5S_TC.png

3/64" Dia, 3 Flute, Square End End Mill - 30773

SGS 3/64" Dia, 0.1090" LOC, 1/8" Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 05S, Square End End Mill - 30773

Series_5S_TN.png

3/64" Dia, 3 Flute, Square End End Mill - 39705

SGS 3/64" Dia, 0.1090" LOC, 1/8" Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 05S, Square End End Mill - 39705

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.