Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_1B_1MB_Drawing.jpg
Series_1B_TA.png

21/64" Dia, 4 Flute, Ball Nose End Mill - 30051

SERIES: 01B

General Application End Mill

21/64" Dia, 1" LOC, 3/8" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 01B, Ball Nose End Mill - 30051


SKU / EDP30051
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series01B
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationBall Nose
Tool LengthLong
Unit (inch/mm)inch
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.3281
Cutting Diameter (DC) (Fractional Inch)21/64
Cutting Diameter (DC) (mm)8.33
Shank Diameter (DCON) (Decimal Inch)0.3750
Shank Diameter (DCON) (Fractional Inch)3/8
Shank Diameter (DCON) (mm)9.53
Length of Cut (APMX) (Decimal Inch)1.0000
Length of Cut (APMX) (Fractional Inch)1
Length of Cut (APMX) (mm)25.40
Overall Length (LF) (Decimal Inch)2.5000
Overall Length (LF) (Fractional Inch)2-1/2
Overall Length (LF) (mm)63.50
Shank Length (LS) (Decimal Inch)1.5000
Shank Length (LS) (Fractional Inch)1-1/2
Shank Length (LS) (mm)38.10
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 30051
Series_1B_TC.png

21/64" Dia, 4 Flute, Ball Nose End Mill - 39042

SGS 21/64" Dia, 1" LOC, 3/8" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 01B, Ball Nose End Mill - 39042

Series_1B_TN.png

21/64" Dia, 4 Flute, Ball Nose End Mill - 39142

SGS 21/64" Dia, 1" LOC, 3/8" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 01B, Ball Nose End Mill - 39142

Series_1B.jpg

21/64" Dia, 4 Flute, Ball Nose End Mill - 30142

SGS 21/64" Dia, 1" LOC, 3/8" Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series 01B, Ball Nose End Mill - 30142

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.