Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_1B_1MB_Drawing.jpg
Series_1ELB_UN.jpg

1/4" Dia, 4 Flute, Ball Nose End Mill - 93341

SERIES: E1B

General Application End Mill

1/4" Dia, 1-1/2" LOC, 1/4" Shank Dia, 4 Flute, 30 Degree Helix, Amorphous Diamond Coated, Series E1B, Ball Nose End Mill - 93341


SKU / EDP93341
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
SeriesE1B
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationBall Nose
Tool LengthExtra Long
Unit (inch/mm)inch
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.2500
Cutting Diameter (DC) (Fractional Inch)1/4
Cutting Diameter (DC) (mm)6.35
Shank Diameter (DCON) (Decimal Inch)0.2500
Shank Diameter (DCON) (Fractional Inch)1/4
Shank Diameter (DCON) (mm)6.35
Length of Cut (APMX) (Decimal Inch)1.5000
Length of Cut (APMX) (Fractional Inch)1-1/2
Length of Cut (APMX) (mm)38.10
Overall Length (LF) (Decimal Inch)4.0000
Overall Length (LF) (Fractional Inch)4
Overall Length (LF) (mm)101.60
Shank Length (LS) (Decimal Inch)2.5000
Shank Length (LS) (Fractional Inch)2-1/2
Shank Length (LS) (mm)63.50
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAmorphous Diamond
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 93341
Series_1ELB_LB_TA.png

1/4" Dia, 4 Flute, Ball Nose End Mill - 31930

SGS 1/4" Dia, 1-1/2" LOC, 1/4" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series E1B, Ball Nose End Mill - 31930

Series_1ELB_LB_TC.png

1/4" Dia, 4 Flute, Ball Nose End Mill - 31920

SGS 1/4" Dia, 1-1/2" LOC, 1/4" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series E1B, Ball Nose End Mill - 31920

Series_1ELB_LB_TN.png

1/4" Dia, 4 Flute, Ball Nose End Mill - 31904

SGS 1/4" Dia, 1-1/2" LOC, 1/4" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series E1B, Ball Nose End Mill - 31904

Series_1ELB_UN.jpg

1/4" Dia, 4 Flute, Ball Nose End Mill - 33124

SGS 1/4" Dia, 1-1/2" LOC, 1/4" Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series E1B, Ball Nose End Mill - 33124

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.