Product Browser - Kyocera SGS Europe
Product Browser - Kyocera SGS Europe

Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_77_LG_CR_CB_IC_TM.jpg
Series_77_LG_CR_CB_IC_TM_2.jpg
Series_77C_77MC_CB_IC_Drawing.jpg
ACTION_Series_77_H-Carb.jpg
https://www.youtube.com/watch?v=2cKlTDsuc2o

1" Dia, 7 Flute, Chip Breaker Corner Radius End Mill - 77507

SERIES: 77CR

H-Carb

1" Dia, 4" LOC, 1" Shank Dia, 0.1200" Radius, 7 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series 77CR, H-Carb, Chip Breaker Corner Radius End Mill - 77507

Feature & Benefits

  • Specializes in deep axial trochoidal and high-speed milling applications
  • Optimized core improves rigidity, chip flow and reduces deflection
  • Chip Breaker design breaks up chips from the long flute length allowing for better chip flow and evacuation in deep pocketing operations
SKU / EDP77507
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
Series77CR
Series DescriptionH-Carb
High PerformanceYes
End ConfigurationChip Breaker (CR)
Tool LengthExtra Long
Unit (inch/mm)inch
Number of Flutes7
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)1.0000
Cutting Diameter (DC) (Fractional Inch)1
Cutting Diameter (DC) (mm)25.40
Shank Diameter (DCON) (Decimal Inch)1.0000
Shank Diameter (DCON) (Fractional Inch)1
Shank Diameter (DCON) (mm)25.40
Length of Cut (APMX) (Decimal Inch)4.0000
Length of Cut (APMX) (Fractional Inch)4
Length of Cut (APMX) (mm)101.60
Overall Length (LF) (Decimal Inch)7.0000
Overall Length (LF) (Fractional Inch)7
Overall Length (LF) (mm)177.80
Corner Radius (RE) (Decimal Inch)0.1200
Corner Radius (RE) (mm)3.05
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.3380
Non-Cutting Center Diameter (NCD) (mm)8.59
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank Diameter (DCON) Tolerance (Decimal Inch)+0.00000/-0.00051
Shank Diameter (DCON) Tolerance (mm)+0.000/-0.013
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionInternal Coolant
Coating DescriptionTM (Ti-NAMITE-M)
Additional GeometryChip Breaker / Right Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixYes
Center CuttingNo
Chip BreakerYes
Alternative Products SKU / EDP to 77507
Series_77_LG_CR_IC_TA.jpg

1" Dia, 7 Flute, Corner Radius End Mill - 77504

SGS 1" Dia, 4" LOC, 1" Shank Dia, 0.1200" Radius, 7 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77CR, H-Carb, Corner Radius End Mill - 77504

Series_77_LG_CR_CB_IC_TA.jpg

1" Dia, 7 Flute, Chip Breaker Corner Radius End Mill - 77506

SGS 1" Dia, 4" LOC, 1" Shank Dia, 0.1200" Radius, 7 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77CR, H-Carb, Chip Breaker Corner Radius End Mill - 77506

Series_77_LG_CR_IC_TM.jpg

1" Dia, 7 Flute, Corner Radius End Mill - 77505

SGS 1" Dia, 4" LOC, 1" Shank Dia, 0.1200" Radius, 7 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series 77CR, H-Carb, Corner Radius End Mill - 77505

Product enquiry form

FUTURE CRM FORM HERE