Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
143.jpg
HiPerCarb 143 final.eps
Series_143_Logo.png
3946_SGS_050.png
https://www.youtube.com/watch?v=8Zwe7utmVNQ

9.30mm Dia, 136 Degree Point, Solid Carbide Drill - 69183

SERIES: 143

Hi-PerCarb 143M-S

9.30mm Dia, 136 Degree Point, 10.00mm Shank Dia, 89.00mm OAL, 2 Flute, 3xD, Coolant-Through, Ti-NAMITE-A (AlTiN) Coated, Series 143, Hi-PerCarb 143M-S, Solid Carbide Drill - 69183

Feature & Benefits

  • Coolant through design improves coolant flow to extend tool life and aid in chip evacuation
  • Eccentric 2-margin design reduces frictional heat and minimizes material adhesion to the margins without weakening the drill
  • Computer controlled edge honing protects against chip damage
  • High-performance point design stabilizes on contact for exceptional hole size and cylindricity allowing for low thrust force and extended tool life
  • SGS Ti-NAMITE®-A coating provides exceptional wear and erosion resistance when drilling heat resisting alloys like Inconel, Stainless Steel, and Titanium Alloys
  • Recommended for materials ≤ 50HRc (475 Bhn)

SKU / EDP69183
CategorySolid Round Tools > Holemaking > High Performance Drills
Min Order Qty1
Series143
Series DescriptionHi-PerCarb 143M-S
High PerformanceYes
Unit (inch/mm)mm
Number of Flutes2
Primary Workpiece Material(M) Stainless Steel|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(P) Steel|(K) Cast Iron
Reach (xD)3xD
Size9.30mm
Cutting Diameter (DC) (Decimal Inch)0.3661
Cutting Diameter (DC) (mm)9.30
Shank Diameter (DCON) (Decimal Inch)0.3937
Shank Diameter (DCON) (mm)10.00
Usable Length (LU) (Decimal Inch)1.3780
Usable Length (LU) (mm)35.00
Flute Length (LCF) (Decimal Inch)1.8504
Flute Length (LCF) (mm)47.00
Overall Length (OAL) (Decimal Inch)3.5039
Overall Length (OAL) (mm)89.00
Shank Length (LS) (Decimal Inch)1.5748
Shank Length (LS) (mm)40.00
Point Angle (Degree)136
Cutting Diameter (DC) Tolerance (Decimal Inch)+.00024 / +.00083
Cutting Diameter (DC) Tolerance (mm)+.0061 / +.0211
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionInternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingNo
Chip BreakerNo
DIN StandardDIN 6537
Number of Margins2
Self CenteringYes

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.