Product Browser - Kyocera SGS Europe
Product Browser - Kyocera SGS Europe

Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_301_301M_Drawing.jpg
Series_301_UN.jpg

5.00mm Dia, 118 Degree, 2 Flute, Countersink - 67023

SERIES: 301

General Application Drill and Countersink Combo

5.00mm Dia, 118 Degree, 2 Flute, 12.50mm Body Dia, Uncoated, Series 301, General Application Drill and Countersink Combo - 67023

SKU / EDP67023
CategorySolid Round Tools > Holemaking > General Application Countersinks
Min Order Qty1
Series301
Series DescriptionGeneral Application Drill and Countersink Combo
High PerformanceNo
Unit (inch/mm)mm
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Size5.00mm
Cutting Diameter (DC) (Decimal Inch)0.1969
Cutting Diameter (DC) (mm)5.00
Body Diameter (DCON) (Decimal Inch)0.4921
Body Diameter (DCON) (mm)12.50
Flute Length (LCF) (Decimal Inch)0.9060
Flute Length (LCF) (mm)23.01
Overall Length (OAL) (Decimal Inch)2.4803
Overall Length (OAL) (mm)63.00
Shank Length (LS) (Decimal Inch)0.6680
Shank Length (LS) (mm)16.97
Point Angle (Degree)118
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Helix AngleRight Spiral
Variable HelixNo
Center CuttingNo
Chip BreakerNo
DIN StandardDIN 333
Chamfer Angle (a) (Degree)30
Primary Chamfer Angle (a) (Degree)30
Number of Margins2
Alternative Products SKU / EDP to 67023
Series_301_TA.jpg

5.00mm Dia, 118 Degree, 2 Flute, Countersink - 67053

SGS 5.00mm Dia, 118 Degree, 2 Flute, 12.50mm Body Dia, Ti-NAMITE-A (AlTiN) Coated, Series 301, General Application Drill and Countersink Combo - 67053

Product enquiry form

FUTURE CRM FORM HERE