Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_103_Drawing.jpg
Series_103_UN.png

3.00mm Dia, 150 Degree Point, Solid Carbide Drill - 63000

SERIES: 103

General Application Drill

3.00mm Dia, 150 Degree Point, 3.00mm Shank Dia, 46.00mm OAL, 3 Flute, 3xD, Uncoated, Series 103, Solid Carbide Drill - 63000


SKU / EDP63000
CategorySolid Round Tools > Holemaking > General Application Drills
Min Order Qty1
Series103
Series DescriptionGeneral Application Drill
High PerformanceNo
Unit (inch/mm)mm
Number of Flutes3
Primary Workpiece Material(P) Steel|(K) Cast Iron|(N) Non-Ferrous Materials
Secondary Workpiece Material(H) Hardened Materials
Reach (xD)3xD
Size3.00mm
Cutting Diameter (DC) (Decimal Inch)0.1181
Cutting Diameter (DC) (mm)3.00
Shank Diameter (DCON) (Decimal Inch)0.1181
Shank Diameter (DCON) (mm)3.00
Usable Length (LU) (Decimal Inch)0.4724
Usable Length (LU) (mm)12.00
Flute Length (LCF) (Decimal Inch)0.6299
Flute Length (LCF) (mm)16.00
Overall Length (OAL) (Decimal Inch)1.8110
Overall Length (OAL) (mm)46.00
Shank Length (LS) (Decimal Inch)1.2000
Shank Length (LS) (mm)30.48
Point Angle (Degree)150
Cutting Diameter (DC) Tolerance (Decimal Inch)+.00000 / -.00050
Cutting Diameter (DC) Tolerance (mm)+.0000 / -.0127
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingNo
Chip BreakerNo
DIN StandardDIN 6539
Number of Margins3

Alternative Products SKU / EDP to 63000
Series_103_TA.png

3.00mm Dia, 150 Degree Point, Solid Carbide Drill - 68965

SGS 3.00mm Dia, 150 Degree Point, 3.00mm Shank Dia, 46.00mm OAL, 3 Flute, 3xD, Ti-NAMITE-A (AlTiN) Coated, Series 103, Solid Carbide Drill - 68965

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.