Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

29/64" Dia, 150 Degree Point, Solid Carbide Drill - 58095

SERIES: 103

General Application Drill

29/64" Dia, 150 Degree Point, 29/64" Shank Dia, 4-3/4" OAL, 3 Flute, 5xD, Ti-NAMITE-A (AlTiN) Coated, Series 103, Solid Carbide Drill - 58095

SKU / EDP	58095
Category	Solid Round Tools > Holemaking > General Application Drills
Min Order Qty	1
Series	103
Series Description	General Application Drill
High Performance	No
Unit (inch/mm)	inch
Number of Flutes	3
Primary Workpiece Material	(P) Steel\|(K) Cast Iron\|(N) Non-Ferrous Materials
Secondary Workpiece Material	(H) Hardened Materials
Reach (xD)	5xD
Size	29/64"
Cutting Diameter (DC) (Decimal Inch)	0.4531
Cutting Diameter (DC) (Fractional Inch)	29/64
Cutting Diameter (DC) (mm)	11.51
Shank Diameter (DCON) (Decimal Inch)	0.4531
Shank Diameter (DCON) (Fractional Inch)	29/64
Shank Diameter (DCON) (mm)	11.51
Usable Length (LU) (Decimal Inch)	2.4062
Usable Length (LU) (Fractional Inch)	2-13/32
Usable Length (LU) (mm)	61.12
Flute Length (LCF) (Decimal Inch)	3.0000

Flute Length (LCF) (Fractional Inch)	3
Flute Length (LCF) (mm)	76.20
Overall Length (OAL) (Decimal Inch)	4.7500
Overall Length (OAL) (Fractional Inch)	4-3/4
Overall Length (OAL) (mm)	120.65
Shank Length (LS) (Decimal Inch)	1.9250
Shank Length (LS) (mm)	48.90
Point Angle (Degree)	150
Cutting Diameter (DC) Tolerance (Decimal Inch)	+.00000 / -.00050
Cutting Diameter (DC) Tolerance (mm)	+.0000 / -.0127
Shank Diameter (DCON) Tolerance (ISO)	h6
Shank Type	Straight
Weldon Flat	No
Coolant Option	External Coolant
Coating Description	AlTiN (Ti-NAMITE-A)
Additional Geometry	Right Hand Cut Direction (RHC)
Helix Angle	Right Spiral
Helix Angle (Degree)	30
Variable Helix	No
Center Cutting	No
Chip Breaker	No
Number of Margins	3