Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Letter D, 118 Degree Point, Solid Carbide Drill - 57174

SERIES: 101

General Application Drill

Letter D, 118 Degree Point, 0.2460" Shank Dia, 3-1/4" OAL, 2 Flute, 5xD, Ti-NAMITE-A (AlTiN) Coated, Series 101, Solid Carbide Drill - 57174

SKU / EDP	57174
Category	Solid Round Tools > Holemaking > General Application Drills
Min Order Qty	1
Series	101
Series Description	General Application Drill
High Performance	No
Unit (inch/mm)	inch
Number of Flutes	2
Primary Workpiece Material	(P) Steel\|(M) Stainless Steel\|(K) Cast Iron\|(N) Non-Ferrous Materials\|(S) High Temp Alloy
Secondary Workpiece Material	(H) Hardened Materials
Reach (xD)	5xD
Size	D
Cutting Diameter (DC) (Decimal Inch)	0.2460
Cutting Diameter (DC) (mm)	6.25
Shank Diameter (DCON) (Decimal Inch)	0.2460
Shank Diameter (DCON) (mm)	6.25
Usable Length (LU) (Decimal Inch)	1.6094
Usable Length (LU) (Fractional Inch)	1-39/64
Usable Length (LU) (mm)	40.88
Flute Length (LCF) (Decimal Inch)	2.0000
Flute Length (LCF) (Fractional Inch)	2
Flute Length (LCF) (mm)	50.80

Overall Length (OAL) (Decimal Inch)	3.2500
Overall Length (OAL) (Fractional Inch)	3-1/4
Overall Length (OAL) (mm)	82.55
Shank Length (LS) (Decimal Inch)	1.2500
Shank Length (LS) (Fractional Inch)	1-1/4
Shank Length (LS) (mm)	31.75
Point Angle (Degree)	118
Cutting Diameter (DC) Tolerance (Decimal Inch)	+.00000 / -.00050
Cutting Diameter (DC) Tolerance (mm)	+.0000 / -.0127
Shank Diameter (DCON) Tolerance (ISO)	h6
Shank Type	Straight
Weldon Flat	No
Coolant Option	External Coolant
Coating Description	AlTiN (Ti-NAMITE-A)
Additional Geometry	Right Hand Cut Direction (RHC)
Helix Angle	Right Spiral
Helix Angle (Degree)	20
Variable Helix	No
Center Cutting	No
Chip Breaker	No
Number of Margins	2