Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

#9, 118 Degree Point, Solid Carbide Drill - 57159

SERIES: 101

General Application Drill

#9, 118 Degree Point, 0.1960" Shank Dia, 3" OAL, 2 Flute, 5xD, Ti-NAMITE-A (AlTiN) Coated, Series 101, Solid Carbide Drill - 57159

SKU / EDP	57159
Category	Solid Round Tools > Holemaking > General Application Drills
Min Order Qty	1
Series	101
Series Description	General Application Drill
High Performance	No
Unit (inch/mm)	inch
Number of Flutes	2
Primary Workpiece Material	(P) Steel\|(M) Stainless Steel\|(K) Cast Iron\|(N) Non-Ferrous Materials\|(S) High Temp Alloy
Secondary Workpiece Material	(H) Hardened Materials
Reach (xD)	5xD
Size	#9
Cutting Diameter (DC) (Decimal Inch)	0.1960
Cutting Diameter (DC) (mm)	4.98
Cutting Diameter (DC) (Wire)	#9
Shank Diameter (DCON) (Decimal Inch)	0.1960
Shank Diameter (DCON) (mm)	4.98
Usable Length (LU) (Decimal Inch)	1.4062
Usable Length (LU) (Fractional Inch)	1-13/32
Usable Length (LU) (mm)	35.72
Flute Length (LCF) (Decimal Inch)	1.7500
Flute Length (LCF) (Fractional Inch)	1-3/4

Flute Length (LCF) (mm)	44.45
Overall Length (OAL) (Decimal Inch)	3.0000
Overall Length (OAL) (Fractional Inch)	3
Overall Length (OAL) (mm)	76.20
Shank Length (LS) (Decimal Inch)	1.2500
Shank Length (LS) (Fractional Inch)	1-1/4
Shank Length (LS) (mm)	31.75
Point Angle (Degree)	118
Cutting Diameter (DC) Tolerance (Decimal Inch)	+.00000 / -.00050
Cutting Diameter (DC) Tolerance (mm)	+.0000 / -.0127
Shank Diameter (DCON) Tolerance (ISO)	h6
Shank Type	Straight
Weldon Flat	No
Coolant Option	External Coolant
Coating Description	AlTiN (Ti-NAMITE-A)
Additional Geometry	Right Hand Cut Direction (RHC)
Helix Angle	Right Spiral
Helix Angle (Degree)	20
Variable Helix	No
Center Cutting	No
Chip Breaker	No
Number of Margins	2