Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_101_Drawing.jpg
Series_101_TA.png

7/64" Dia, 118 Degree Point, Solid Carbide Drill - 57127

SERIES: 101

General Application Drill

7/64" Dia, 118 Degree Point, 7/64" Shank Dia, 2-1/4" OAL, 2 Flute, 5xD, Ti-NAMITE-A (AlTiN) Coated, Series 101, Solid Carbide Drill - 57127


SKU / EDP57127
CategorySolid Round Tools > Holemaking > General Application Drills
Min Order Qty1
Series101
Series DescriptionGeneral Application Drill
High PerformanceNo
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Reach (xD)5xD
Size7/64"
Cutting Diameter (DC) (Decimal Inch)0.1094
Cutting Diameter (DC) (Fractional Inch)7/64
Cutting Diameter (DC) (mm)2.78
Shank Diameter (DCON) (Decimal Inch)0.1094
Shank Diameter (DCON) (Fractional Inch)7/64
Shank Diameter (DCON) (mm)2.78
Usable Length (LU) (Decimal Inch)1.0000
Usable Length (LU) (Fractional Inch)1
Usable Length (LU) (mm)25.40
Flute Length (LCF) (Decimal Inch)1.2500
Flute Length (LCF) (Fractional Inch)1-1/4
Flute Length (LCF) (mm)31.75
Overall Length (OAL) (Decimal Inch)2.2500
Overall Length (OAL) (Fractional Inch)2-1/4
Overall Length (OAL) (mm)57.15
Shank Length (LS) (Decimal Inch)1.0000
Shank Length (LS) (Fractional Inch)1
Shank Length (LS) (mm)25.40
Point Angle (Degree)118
Cutting Diameter (DC) Tolerance (Decimal Inch)+.00000 / -.00050
Cutting Diameter (DC) Tolerance (mm)+.0000 / -.0150
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Helix AngleRight Spiral
Helix Angle (Degree)20
Variable HelixNo
Center CuttingNo
Chip BreakerNo
Number of Margins2

Alternative Products SKU / EDP to 57127
Series_101_TC.png

7/64" Dia, 118 Degree Point, Solid Carbide Drill - 51107

SGS 7/64" Dia, 118 Degree Point, 7/64" Shank Dia, 2-1/4" OAL, 2 Flute, 5xD, Uncoated, Series 101, Solid Carbide Drill - 51107

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.