Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

#35, 140 Degree Point, Solid Carbide Drill - 56244

SERIES: 106

General Application Drill - Straight Flute

#35, 140 Degree Point, 0.1100" Shank Dia, 1-7/8" OAL, 2 Flute, 3xD, Ti-NAMITE-A (AlTiN) Coated, Series 106, Straight Flute, Solid Carbide Drill - 56244

SKU / EDP	56244
Category	Solid Round Tools > Holemaking > General Application Drills
Min Order Qty	1
Series	106
Series Description	General Application Drill - Straight Flute
High Performance	No
Unit (inch/mm)	inch
Number of Flutes	2
Primary Workpiece Material	(P) Steel\|(K) Cast Iron
Secondary Workpiece Material	(H) Hardened Materials
Reach (xD)	3xD
Size	#35
Cutting Diameter (DC) (Decimal Inch)	0.1100
Cutting Diameter (DC) (mm)	2.79
Cutting Diameter (DC) (Wire)	#35
Shank Diameter (DCON) (Decimal Inch)	0.1100
Shank Diameter (DCON) (mm)	2.79
Usable Length (LU) (Decimal Inch)	0.7031
Usable Length (LU) (Fractional Inch)	45/64
Usable Length (LU) (mm)	17.86
Flute Length (LCF) (Decimal Inch)	0.8750

Flute Length (LCF) (Fractional Inch)	7/8
Flute Length (LCF) (mm)	22.23
Overall Length (OAL) (Decimal Inch)	1.8750
Overall Length (OAL) (Fractional Inch)	1-7/8
Overall Length (OAL) (mm)	47.63
Shank Length (LS) (Decimal Inch)	1.0220
Shank Length (LS) (mm)	25.96
Point Angle (Degree)	140
Cutting Diameter (DC) Tolerance (Decimal Inch)	+.00000 / -.00050
Cutting Diameter (DC) Tolerance (mm)	+.0000 / -.0099
Shank Diameter (DCON) Tolerance (ISO)	h6
Shank Type	Straight
Weldon Flat	No
Coolant Option	External Coolant
Coating Description	AlTiN (Ti-NAMITE-A)
Additional Geometry	Right Hand Cut Direction (RHC)
Helix Angle	Right Spiral
Variable Helix	No
Center Cutting	No
Chip Breaker	No
Number of Margins	2