Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_5B_5MB_Drawing.jpg
Series_5ELB_TN.png

5.00mm Dia, 3 Flute, Ball Nose End Mill - 49586

SERIES: X5B

General Application End Mill

5.00mm Dia, 25.00mm LOC, 5.00mm Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series X5B, Ball Nose End Mill - 49586


SKU / EDP49586
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
SeriesX5B
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationBall Nose
Tool LengthExtra Long
Unit (inch/mm)mm
Number of Flutes3
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.1969
Cutting Diameter (DC) (mm)5.00
Shank Diameter (DCON) (Decimal Inch)0.1969
Shank Diameter (DCON) (mm)5.00
Length of Cut (APMX) (Decimal Inch)0.9843
Length of Cut (APMX) (mm)25.00
Overall Length (LF) (Decimal Inch)2.9528
Overall Length (LF) (mm)75.00
Shank Length (LS) (Decimal Inch)1.9660
Shank Length (LS) (mm)49.94
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiN (Ti-NAMITE)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 49586
Series_5ELB_TA.png

5.00mm Dia, 3 Flute, Ball Nose End Mill - 49612

SGS 5.00mm Dia, 25.00mm LOC, 5.00mm Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series X5B, Ball Nose End Mill - 49612

Series_5ELB_TC.png

5.00mm Dia, 3 Flute, Ball Nose End Mill - 49599

SGS 5.00mm Dia, 25.00mm LOC, 5.00mm Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series X5B, Ball Nose End Mill - 49599

Series_5XLB_UN.jpg

5.00mm Dia, 3 Flute, Ball Nose End Mill - 43508

SGS 5.00mm Dia, 25.00mm LOC, 5.00mm Shank Dia, 3 Flute, 30 Degree Helix, Uncoated, Series X5B, Ball Nose End Mill - 43508

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.