Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_3_3M_Drawing.jpg
Series_3EL_TC.png

14.00mm Dia, 2 Flute, Square End End Mill - 49448

SERIES: X3S

General Application End Mill

14.00mm Dia, 75.00mm LOC, 14.00mm Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series X3S, Square End End Mill - 49448


SKU / EDP49448
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
SeriesX3S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthExtra Long
Unit (inch/mm)mm
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.5512
Cutting Diameter (DC) (mm)14.00
Shank Diameter (DCON) (Decimal Inch)0.5512
Shank Diameter (DCON) (mm)14.00
Length of Cut (APMX) (Decimal Inch)2.9528
Length of Cut (APMX) (mm)75.00
Overall Length (LF) (Decimal Inch)5.9055
Overall Length (LF) (mm)150.00
Shank Length (LS) (Decimal Inch)2.5000
Shank Length (LS) (mm)63.50
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiCN (Ti-NAMITE-C)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 49448
Series_3EL_TA.png

14.00mm Dia, 2 Flute, Square End End Mill - 49461

SGS 14.00mm Dia, 75.00mm LOC, 14.00mm Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series X3S, Square End End Mill - 49461

Series_3EL_TN.png

14.00mm Dia, 2 Flute, Square End End Mill - 49435

SGS 14.00mm Dia, 75.00mm LOC, 14.00mm Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series X3S, Square End End Mill - 49435

Series_3EL_UN.jpg

14.00mm Dia, 2 Flute, Square End End Mill - 43355

SGS 14.00mm Dia, 75.00mm LOC, 14.00mm Shank Dia, 2 Flute, 30 Degree Helix, Uncoated, Series X3S, Square End End Mill - 43355

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.