Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_1_1M_Drawing.jpg
Series_1EL_L_TN.png

16.00mm Dia, 4 Flute, Square End End Mill - 49397

SERIES: X1S

General Application End Mill

16.00mm Dia, 75.00mm LOC, 16.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series X1S, Square End End Mill - 49397


SKU / EDP49397
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
SeriesX1S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthExtra Long
Unit (inch/mm)mm
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.6299
Cutting Diameter (DC) (mm)16.00
Shank Diameter (DCON) (Decimal Inch)0.6299
Shank Diameter (DCON) (mm)16.00
Length of Cut (APMX) (Decimal Inch)2.9528
Length of Cut (APMX) (mm)75.00
Overall Length (LF) (Decimal Inch)5.9055
Overall Length (LF) (mm)150.00
Shank Length (LS) (Decimal Inch)2.9570
Shank Length (LS) (mm)75.11
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiN (Ti-NAMITE)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 49397
Series_1EL_TA.png

16.00mm Dia, 4 Flute, Square End End Mill - 49423

SGS 16.00mm Dia, 75.00mm LOC, 16.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series X1S, Square End End Mill - 49423

Series_1EL_L_TC.png

16.00mm Dia, 4 Flute, Square End End Mill - 49410

SGS 16.00mm Dia, 75.00mm LOC, 16.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series X1S, Square End End Mill - 49410

Series_1EL_UN.jpg

16.00mm Dia, 4 Flute, Square End End Mill - 43165

SGS 16.00mm Dia, 75.00mm LOC, 16.00mm Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series X1S, Square End End Mill - 43165

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.