Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

3.50mm Dia, 2 Flute, Square End End Mill - 49309

SERIES: 17S

General Application End Mill

3.50mm Dia, 7.00mm LOC, 4.00mm Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 17S, Square End End Mill - 49309

SKU / EDP	49309
Category	Solid Round Tools > Milling > General Application End Mills
Min Order Qty	1
Series	17S
Series Description	General Application End Mill
End Configuration	Square End
Tool Length	Stub
Unit (inch/mm)	mm
Number of Flutes	2
Primary Workpiece Material	(P) Steel\|(M) Stainless Steel\|(K) Cast Iron\|(N) Non-Ferrous Materials\|(S) High Temp Alloy
Secondary Workpiece Material	(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)	0.1378
Cutting Diameter (DC) (mm)	3.50
Shank Diameter (DCON) (Decimal Inch)	0.1575
Shank Diameter (DCON) (mm)	4.00
Length of Cut (APMX) (Decimal Inch)	0.2756
Length of Cut (APMX) (mm)	7.00
Overall Length (LF) (Decimal Inch)	1.9685

Overall Length (LF) (mm)	50.00
Shank Length (LS) (Decimal Inch)	1.6940
Shank Length (LS) (mm)	43.03
Cutting Diameter (DC) Tolerance (Decimal Inch)	+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)	+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)	h6
Shank Type	Straight
Weldon Flat	No
Coolant Option	External Coolant
Coating Description	AlTiN (Ti-NAMITE-A)
Additional Geometry	Right Hand Cut Direction (RHC)
Rake Angle	Positive
Helix Angle	Right Spiral
Helix Angle (Degree)	30
Variable Helix	No
Center Cutting	Yes
Chip Breaker	No

Alternative Products SKU / EDP to 49309

3.50mm Dia, 2 Flute, Square End End Mill - 49036

SGS 3.50mm Dia, 7.00mm LOC, 4.00mm Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 15S, Double-End, Square End End Mill - 49036