Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_15B_15MB_Drawing.jpg
Series_15B_TC.png

1.50mm Dia, 2 Flute, Ball Nose End Mill - 49095

SERIES: 15B

General Application End Mill - Double-End

1.50mm Dia, 3.00mm LOC, 3.00mm Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 15B, Double-End, Ball Nose End Mill - 49095


SKU / EDP49095
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series15B
Series DescriptionGeneral Application End Mill - Double-End
High PerformanceNo
End ConfigurationBall Nose
Tool LengthStub
Unit (inch/mm)mm
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.0591
Cutting Diameter (DC) (mm)1.50
Shank Diameter (DCON) (Decimal Inch)0.1181
Shank Diameter (DCON) (mm)3.00
Length of Cut (APMX) (Decimal Inch)0.1181
Length of Cut (APMX) (mm)3.00
Overall Length (LF) (Decimal Inch)1.4961
Overall Length (LF) (mm)38.00
Shank Length (LS) (Decimal Inch)1.3820
Shank Length (LS) (mm)35.10
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiCN (Ti-NAMITE-C)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 49095
Series_15B_TA.png

1.50mm Dia, 2 Flute, Ball Nose End Mill - 49116

SGS 1.50mm Dia, 3.00mm LOC, 3.00mm Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 15B, Double-End, Ball Nose End Mill - 49116

Series_15B_TN.png

1.50mm Dia, 2 Flute, Ball Nose End Mill - 49074

SGS 1.50mm Dia, 3.00mm LOC, 3.00mm Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 15B, Double-End, Ball Nose End Mill - 49074

Series_15B_UN.jpg

1.50mm Dia, 2 Flute, Ball Nose End Mill - 41510

SGS 1.50mm Dia, 3.00mm LOC, 3.00mm Shank Dia, 2 Flute, 30 Degree Helix, Uncoated, Series 15B, Double-End, Ball Nose End Mill - 41510

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.