Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_14B_14MB_Drawing.jpg
Series_14B_TC.png

4.50mm Dia, 4 Flute, Ball Nose End Mill - 48975

SERIES: 14B

General Application End Mill - Double-End

4.50mm Dia, 9.50mm LOC, 4.50mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 14B, Double-End, Ball Nose End Mill - 48975


SKU / EDP48975
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series14B
Series DescriptionGeneral Application End Mill - Double-End
High PerformanceNo
End ConfigurationBall Nose
Tool LengthStub
Unit (inch/mm)mm
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.1772
Cutting Diameter (DC) (mm)4.50
Shank Diameter (DCON) (Decimal Inch)0.1772
Shank Diameter (DCON) (mm)4.50
Length of Cut (APMX) (Decimal Inch)0.3740
Length of Cut (APMX) (mm)9.50
Overall Length (LF) (Decimal Inch)2.4803
Overall Length (LF) (mm)63.00
Shank Length (LS) (Decimal Inch)2.1060
Shank Length (LS) (mm)53.49
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiCN (Ti-NAMITE-C)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 48975
Series_14B_TA.png

4.50mm Dia, 4 Flute, Ball Nose End Mill - 48996

SGS 4.50mm Dia, 9.50mm LOC, 4.50mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 14B, Double-End, Ball Nose End Mill - 48996

Series_14B_TN.png

4.50mm Dia, 4 Flute, Ball Nose End Mill - 48954

SGS 4.50mm Dia, 9.50mm LOC, 4.50mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 14B, Double-End, Ball Nose End Mill - 48954

Series_14B_UN.jpg

4.50mm Dia, 4 Flute, Ball Nose End Mill - 41434

SGS 4.50mm Dia, 9.50mm LOC, 4.50mm Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series 14B, Double-End, Ball Nose End Mill - 41434

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.