Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_1B_1MB_Drawing.jpg
Series_1B_TC.png

18.00mm Dia, 4 Flute, Ball Nose End Mill - 48604

SERIES: 01B

General Application End Mill

18.00mm Dia, 38.00mm LOC, 18.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 01B, Ball Nose End Mill - 48604


SKU / EDP48604
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series01B
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationBall Nose
Tool LengthRegular
Unit (inch/mm)mm
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.7087
Cutting Diameter (DC) (mm)18.00
Shank Diameter (DCON) (Decimal Inch)0.7087
Shank Diameter (DCON) (mm)18.00
Length of Cut (APMX) (Decimal Inch)1.4961
Length of Cut (APMX) (mm)38.00
Overall Length (LF) (Decimal Inch)3.9370
Overall Length (LF) (mm)100.00
Shank Length (LS) (Decimal Inch)2.4440
Shank Length (LS) (mm)62.08
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiCN (Ti-NAMITE-C)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 48604
Series_1B_TA.png

18.00mm Dia, 4 Flute, Ball Nose End Mill - 48625

SGS 18.00mm Dia, 38.00mm LOC, 18.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 01B, Ball Nose End Mill - 48625

Series_1B_TN.png

18.00mm Dia, 4 Flute, Ball Nose End Mill - 48582

SGS 18.00mm Dia, 38.00mm LOC, 18.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 01B, Ball Nose End Mill - 48582

Series_1B.jpg

18.00mm Dia, 4 Flute, Ball Nose End Mill - 40178

SGS 18.00mm Dia, 38.00mm LOC, 18.00mm Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series 01B, Ball Nose End Mill - 40178

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.