Product Browser - Kyocera SGS Europe
Product Browser - Kyocera SGS Europe

Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Logo.jpg
Series_Z5CRIC_Z5MCRIC_Drawing.jpg
Series_Z5_IC_TA.png
Series_Z5TA_Logo_Vector.eps
Z-Carb-HPR_Action.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

16.00mm Dia, 5 Flute, Corner Radius End Mill - 48056

SERIES: Z5C

Z-Carb-HPR

16.00mm Dia, 19.00mm LOC, 16.00mm Shank Dia, 1.00mm Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 48056

Feature & Benefits

  • An ideal balance of helix, indexing, flute depth, rake and relief
  • Variable indexing for chatter supression and patented edge geometry for shearing and strength
  • Chatter-free geometry allows deep cutting and high speed machining
  • Central coolant hole delivers coolant effectively to the cutting zone enhancing chip removal when pocketing or slotting
  • Enhanced corner geometry with tight tolerance corner radii
  • Excels at roughing, ramping, high speed machining and finishing in a variety of materials
SKU / EDP48056
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5C
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthStub
Unit (inch/mm)mm
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.6299
Cutting Diameter (DC) (mm)16.00
Shank Diameter (DCON) (Decimal Inch)0.6299
Shank Diameter (DCON) (mm)16.00
Length of Cut (APMX) (Decimal Inch)0.7480
Length of Cut (APMX) (mm)19.00
Overall Length (LF) (Decimal Inch)3.2283
Overall Length (LF) (mm)82.00
Corner Radius (RE) (Decimal Inch)0.0394
Corner Radius (RE) (mm)1.00
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.2200
Non-Cutting Center Diameter (NCD) (mm)5.59
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionInternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerNo
Alternative Products SKU / EDP to 48056
Series_Z5CR_TA.jpg

16.00mm Dia, 5 Flute, Corner Radius End Mill - 48016

SGS 16.00mm Dia, 19.00mm LOC, 16.00mm Shank Dia, 1.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 48016

Series_Z5CR_TA.jpg

16.00mm Dia, 5 Flute, Corner Radius End Mill - 48034

SGS 16.00mm Dia, 19.00mm LOC, 16.00mm Shank Dia, 1.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 48034

Series_Z5CR_TM.jpg

16.00mm Dia, 5 Flute, Corner Radius End Mill - 47032

SGS 16.00mm Dia, 19.00mm LOC, 16.00mm Shank Dia, 1.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47032

Series_Z5CR_TM.jpg

16.00mm Dia, 5 Flute, Corner Radius End Mill - 47039

SGS 16.00mm Dia, 19.00mm LOC, 16.00mm Shank Dia, 1.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47039

Series_Z5_IC_TM.png

16.00mm Dia, 5 Flute, Corner Radius End Mill - 47046

SGS 16.00mm Dia, 19.00mm LOC, 16.00mm Shank Dia, 1.00mm Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47046

Product enquiry form

FUTURE CRM FORM HERE