Product Browser - Kyocera SGS Europe
Product Browser - Kyocera SGS Europe

Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Logo.jpg
Series_Z5CR_Z5MCR_Drawing.jpg
Series_Z5CR_TA.jpg
Series_Z5TA_Logo_Vector.eps
Z-Carb-HPR_Action.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

12.00mm Dia, 5 Flute, Corner Radius End Mill - 48033

SERIES: Z5C

Z-Carb-HPR

12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 3.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 48033

Feature & Benefits

  • An ideal balance of helix, indexing, flute depth, rake and relief
  • Variable indexing for chatter supression and patented edge geometry for shearing and strength
  • Chatter-free geometry allows deep cutting and high speed machining
  • Enhanced corner geometry with tight tolerance corner radii
  • Excels at roughing, ramping, high speed machining and finishing in a variety of materials
SKU / EDP48033
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5C
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthRegular
Unit (inch/mm)mm
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.4724
Cutting Diameter (DC) (mm)12.00
Shank Diameter (DCON) (Decimal Inch)0.4724
Shank Diameter (DCON) (mm)12.00
Length of Cut (APMX) (Decimal Inch)1.0236
Length of Cut (APMX) (mm)26.00
Overall Length (LF) (Decimal Inch)3.2677
Overall Length (LF) (mm)83.00
Corner Radius (RE) (Decimal Inch)0.1181
Corner Radius (RE) (mm)3.00
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.1650
Non-Cutting Center Diameter (NCD) (mm)4.19
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeWeldon (Drive Flat)
Weldon FlatYes
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerNo
DIN Standard (Shank)DIN 6535 HB
Alternative Products SKU / EDP to 48033
Series_Z5CR_TA.jpg

12.00mm Dia, 5 Flute, Corner Radius End Mill - 48015

SGS 12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 3.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 48015

Series_Z5_IC_TA.jpg

12.00mm Dia, 5 Flute, Corner Radius End Mill - 47172

SGS 12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 3.00mm Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47172

Series_Z5CR_TM.jpg

12.00mm Dia, 5 Flute, Corner Radius End Mill - 47023

SGS 12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 3.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47023

Series_Z5CR_TM.jpg

12.00mm Dia, 5 Flute, Corner Radius End Mill - 47031

SGS 12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 3.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47031

Series_Z5_IC_TM.jpg

12.00mm Dia, 5 Flute, Corner Radius End Mill - 47173

SGS 12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 3.00mm Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47173

Product enquiry form

FUTURE CRM FORM HERE