Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Logo.jpg
Z5LC_RCH_CB_TA.jpg
Z5CLR_Diagram.jpg
Z-Carb-HPR_Action_Reach.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

8.00mm Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 47657

SERIES: Z5C

Z-Carb-HPR

8.00mm Dia, 18.00mm LOC, 32.00mm Reach, 8.00mm Shank Dia, 1.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 47657

Feature & Benefits

  • Positive Radial Rake
  • Variable Flute Pattern
  • Open Center Design
  • Long Reach

SKU / EDP47657
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5C
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationChip Breaker (CR)
Tool LengthLong Reach Neck
Unit (inch/mm)mm
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.3150
Cutting Diameter (DC) (mm)8.00
Shank Diameter (DCON) (Decimal Inch)0.3150
Shank Diameter (DCON) (mm)8.00
Length of Cut (APMX) (Decimal Inch)0.7087
Length of Cut (APMX) (mm)18.00
Reach (LU) (Decimal Inch)1.2598
Reach (LU) (mm)32.00
Overall Length (LF) (Decimal Inch)2.9528
Overall Length (LF) (mm)75.00
Neck Diameter (DN) (Decimal Inch)0.2992
Neck Diameter (DN) (mm)7.60
Corner Radius (RE) (Decimal Inch)0.0394
Corner Radius (RE) (mm)1.00
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.1100
Non-Cutting Center Diameter (NCD) (mm)2.79
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0016
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.040
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerYes

Alternative Products SKU / EDP to 47657
Z5LC_RCH_TA.jpg

8.00mm Dia, 5 Flute, Corner Radius End Mill - 47656

SGS 8.00mm Dia, 18.00mm LOC, 32.00mm Reach, 8.00mm Shank Dia, 1.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47656

Z5LC_RCH_TM.jpg

8.00mm Dia, 5 Flute, Corner Radius End Mill - 47658

SGS 8.00mm Dia, 18.00mm LOC, 32.00mm Reach, 8.00mm Shank Dia, 1.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47658

Z5LC_RCH_CB_TM.jpg

8.00mm Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 47659

SGS 8.00mm Dia, 18.00mm LOC, 32.00mm Reach, 8.00mm Shank Dia, 1.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 47659

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.