Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z1PLC_TA.jpg
Series_Z1PLC_Z1MPLC_Z1MPIC_Drawing.jpg
Series_Z1_Logo_Vector.eps
Series_Z1P_Logo.jpeg
https://www.youtube.com/watch?v=Uj183IuCnZc

16.00mm Dia, 4 Flute, Corner Radius End Mill - 46933

SERIES: ZPMC

Z-Carb-AP

16.00mm Dia, 20.00mm LOC, 65.00mm Reach, 16.00mm Shank Dia, 1.50mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill - 46933

Feature & Benefits

  • Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
  • Unequal helix design changes the cutting angle to improve harmonics
  • Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
  • Long reach design allows for deeper and faster cuts

SKU / EDP46933
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZPMC
Series DescriptionZ-Carb-AP
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthLong Reach Neck
Unit (inch/mm)mm
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.6299
Cutting Diameter (DC) (mm)16.00
Shank Diameter (DCON) (Decimal Inch)0.6299
Shank Diameter (DCON) (mm)16.00
Length of Cut (APMX) (Decimal Inch)0.7874
Length of Cut (APMX) (mm)20.00
Reach (LU) (Decimal Inch)2.5591
Reach (LU) (mm)65.00
Overall Length (LF) (Decimal Inch)4.5276
Overall Length (LF) (mm)115.00
Neck Diameter (DN) (Decimal Inch)0.6100
Neck Diameter (DN) (mm)15.49
Corner Radius (RE) (Decimal Inch)0.0591
Corner Radius (RE) (mm)1.50
Shank Length (LS) (Decimal Inch)1.9690
Shank Length (LS) (mm)50.01
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeWeldon (Drive Flat)
Weldon FlatYes
Coolant OptionExternal Coolant
Coating DescriptionTX (Ti-NAMITE-X)
Additional GeometryFlute Spacing Unequal / Right Hand Cut Direction (RHC)
Rake AngleVariable
Helix AngleVariable Right Spiral
Helix Angle (Degree)35-38
Variable HelixYes
Center CuttingYes
Chip BreakerNo
DIN Standard (Shank)DIN 6535 HB

Alternative Products SKU / EDP to 46933
Series_Z1PLC_TA.jpg

16.00mm Dia, 4 Flute, Corner Radius End Mill - 46831

SGS 16.00mm Dia, 20.00mm LOC, 65.00mm Reach, 16.00mm Shank Dia, 1.50mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill - 46831

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.