Product Browser
If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.
12.00mm Dia, 4 Flute, Corner Radius End Mill - 46930
SERIES: ZPMC
Z-Carb-AP
12.00mm Dia, 15.00mm LOC, 48.01mm Reach, 12.00mm Shank Dia, 2.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill - 46930
Feature & Benefits
- Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
- Unequal helix design changes the cutting angle to improve harmonics
- Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
- Long reach design allows for deeper and faster cuts
SKU / EDP | 46930 |
---|---|
Category | Solid Round Tools > Milling > High Performance End Mills |
Min Order Qty | 1 |
Series | ZPMC |
Series Description | Z-Carb-AP |
High Performance | Yes |
End Configuration | Corner Radius |
Tool Length | Long Reach Neck |
Unit (inch/mm) | mm |
Number of Flutes | 4 |
Primary Workpiece Material | (P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy |
Secondary Workpiece Material | (H) Hardened Materials |
Cutting Diameter (DC) (Decimal Inch) | 0.4724 |
Cutting Diameter (DC) (mm) | 12.00 |
Shank Diameter (DCON) (Decimal Inch) | 0.4724 |
Shank Diameter (DCON) (mm) | 12.00 |
Length of Cut (APMX) (Decimal Inch) | 0.5906 |
Length of Cut (APMX) (mm) | 15.00 |
Reach (LU) (Decimal Inch) | 1.8900 |
Reach (LU) (mm) | 48.01 |
Overall Length (LF) (Decimal Inch) | 3.9370 |
Overall Length (LF) (mm) | 100.00 |
Neck Diameter (DN) (Decimal Inch) | 0.4520 |
Neck Diameter (DN) (mm) | 11.48 |
---|---|
Corner Radius (RE) (Decimal Inch) | 0.0787 |
Corner Radius (RE) (mm) | 2.00 |
Shank Length (LS) (Decimal Inch) | 2.0470 |
Shank Length (LS) (mm) | 51.99 |
Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.050 |
Shank Diameter (DCON) Tolerance (ISO) | h6 |
Corner Radius (RE) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
Corner Radius (RE) Tolerance (mm) | +0.000/-0.050 |
Shank Type | Weldon (Drive Flat) |
Weldon Flat | Yes |
Coolant Option | External Coolant |
Coating Description | TX (Ti-NAMITE-X) |
Additional Geometry | Flute Spacing Unequal / Right Hand Cut Direction (RHC) |
Rake Angle | Variable |
Helix Angle | Variable Right Spiral |
Helix Angle (Degree) | 35-38 |
Variable Helix | Yes |
Center Cutting | Yes |
Chip Breaker | No |
DIN Standard (Shank) | DIN 6535 HB |
Alternative Products SKU / EDP to 46930
12.00mm Dia, 4 Flute, Corner Radius End Mill - 46828
SGS 12.00mm Dia, 15.00mm LOC, 48.01mm Reach, 12.00mm Shank Dia, 2.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill - 46828
12.00mm Dia, 4 Flute, Corner Radius End Mill - 46828
SGS 12.00mm Dia, 15.00mm LOC, 48.01mm Reach, 12.00mm Shank Dia, 2.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill - 46828
Product enquiry form
FUTURE CRM FORM HERE