Product Browser
If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.
20.00mm Dia, 4 Flute, Corner Radius End Mill - 46481
SERIES: ZH1M
Z-Carb-HTA
20.00mm Dia, 38.00mm LOC, 20.00mm Shank Dia, 5.00mm Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1M, Z-Carb-HTA, Corner Radius End Mill - 46481
Feature & Benefits
- The original Z-Carb design with an enhanced core and higher helix suited for the demands of high temperature alloys
- Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
- Optimal material removal rates through increased feed and depths of cut for difficult to machine materials
- Enhanced corner geometry with tight tolerance corner radii
- Recommended for materials ≤ 45 HRc (≤ 420 Bhn)
SKU / EDP | 46481 |
---|---|
Category | Solid Round Tools > Milling > High Performance End Mills |
Min Order Qty | 1 |
Series | ZH1M |
Series Description | Z-Carb-HTA |
High Performance | Yes |
End Configuration | Corner Radius |
Tool Length | Stub |
Unit (inch/mm) | mm |
Number of Flutes | 4 |
Primary Workpiece Material | (P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy |
Secondary Workpiece Material | (H) Hardened Materials |
Cutting Diameter (DC) (Decimal Inch) | 0.7874 |
Cutting Diameter (DC) (mm) | 20.00 |
Shank Diameter (DCON) (Decimal Inch) | 0.7874 |
Shank Diameter (DCON) (mm) | 20.00 |
Length of Cut (APMX) (Decimal Inch) | 1.4961 |
Length of Cut (APMX) (mm) | 38.00 |
Overall Length (LF) (Decimal Inch) | 4.0945 |
Overall Length (LF) (mm) | 104.00 |
Corner Radius (RE) (Decimal Inch) | 0.1969 |
Corner Radius (RE) (mm) | 5.00 |
---|---|
Shank Length (LS) (Decimal Inch) | 2.6040 |
Shank Length (LS) (mm) | 66.14 |
Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.050 |
Shank Diameter (DCON) Tolerance (ISO) | h6 |
Corner Radius (RE) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
Corner Radius (RE) Tolerance (mm) | +0.000/-0.050 |
Shank Type | Weldon (Drive Flat) |
Weldon Flat | Yes |
Coolant Option | External Coolant |
Coating Description | AlTiN (Ti-NAMITE-A) |
Additional Geometry | Flute Spacing Unequal / Right Hand Cut Direction (RHC) |
Rake Angle | Positive |
Helix Angle | Variable Right Spiral |
Helix Angle (Degree) | 38-41 |
Variable Helix | Yes |
Center Cutting | Yes |
Chip Breaker | No |
DIN Standard (Shank) | DIN 6535 HB |
Alternative Products SKU / EDP to 46481
20.00mm Dia, 4 Flute, Corner Radius End Mill - 46470
SGS 20.00mm Dia, 38.00mm LOC, 20.00mm Shank Dia, 5.00mm Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1M, Z-Carb-HTA, Corner Radius End Mill - 46470
20.00mm Dia, 4 Flute, Corner Radius End Mill - 46869
SGS 20.00mm Dia, 38.00mm LOC, 20.00mm Shank Dia, 5.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill - 46869
20.00mm Dia, 4 Flute, Corner Radius End Mill - 46946
SGS 20.00mm Dia, 38.00mm LOC, 20.00mm Shank Dia, 5.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill - 46946
20.00mm Dia, 4 Flute, Corner Radius End Mill - 46470
SGS 20.00mm Dia, 38.00mm LOC, 20.00mm Shank Dia, 5.00mm Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1M, Z-Carb-HTA, Corner Radius End Mill - 46470
20.00mm Dia, 4 Flute, Corner Radius End Mill - 46869
SGS 20.00mm Dia, 38.00mm LOC, 20.00mm Shank Dia, 5.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill - 46869
20.00mm Dia, 4 Flute, Corner Radius End Mill - 46946
SGS 20.00mm Dia, 38.00mm LOC, 20.00mm Shank Dia, 5.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill - 46946
Product enquiry form
FUTURE CRM FORM HERE