Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z1PB_Z1MPB_Drawing.jpg
Z-Carb.eps
Series_Z1_Logo.jpg
Series_Z1PB_TX_2.jpg
Series_Z1PB_TX.jpg
https://www.youtube.com/watch?v=AuEulYA5Rro

12.00mm Dia, 4 Flute, Ball Nose End Mill - 46346

SERIES: Z1MB

Z-Carb-AP

12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMB, Z-Carb-AP, Ball Nose End Mill - 46346

Feature & Benefits

  • Unequal helix design reduces damaging harmonics by changing the angle at which each cutting edge enters and exits the material
  • Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
  • Optimal material removal rates through increased feed and depths of cut
  • Ball end design ideal for finishing operations in complex workpieces
  • Recommended for materials ≤ 45 HRc (≤ 420 Bhn)

SKU / EDP46346
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ1MB
Series DescriptionZ-Carb-AP
High PerformanceYes
End ConfigurationBall Nose
Tool LengthRegular
Unit (inch/mm)mm
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.4724
Cutting Diameter (DC) (mm)12.00
Shank Diameter (DCON) (Decimal Inch)0.4724
Shank Diameter (DCON) (mm)12.00
Length of Cut (APMX) (Decimal Inch)1.0236
Length of Cut (APMX) (mm)26.00
Overall Length (LF) (Decimal Inch)3.2677
Overall Length (LF) (mm)83.00
Shank Length (LS) (Decimal Inch)2.2460
Shank Length (LS) (mm)57.05
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTX (Ti-NAMITE-X)
Additional GeometryFlute Spacing Unequal / Right Hand Cut Direction (RHC)
Rake AngleVariable
Helix AngleVariable Right Spiral
Helix Angle (Degree)35-38
Variable HelixYes
Center CuttingYes
Chip BreakerNo

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.