Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_51_Logo.jpg
Series_51L_51ML_Drawing.jpg
Series_51L_TX.png
Series_51_Logo_Vector.eps
https://www.youtube.com/watch?v=U_cVjG1TjfA

16.00mm Dia, 6 Flute, Square End End Mill - 45110

SERIES: 51S

T-Carb

16.00mm Dia, 20.00mm LOC, 65.00mm Reach, 16.00mm Shank Dia, 6 Flute, 41 Degree Helix, Ti-NAMITE-X (TX) Coated, Series 51S, T-Carb, Square End End Mill - 45110

Feature & Benefits

  • Engineered for High Speed Milling using Trochoidal and Peel Milling techniques
  • Eccentric relief provides superior strength and smoother surface finish
  • Necked design with blended diameter transitions provide clearance to reach
  • Enhanced corner geometry with tight tolerance corner radii
  • Recommended for materials ≤ 45 HRc (≤ 420 Bhn)

SKU / EDP45110
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
Series51S
Series DescriptionT-Carb
High PerformanceYes
End ConfigurationSquare End
Tool LengthLong Reach Neck
Unit (inch/mm)mm
Number of Flutes6
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.6299
Cutting Diameter (DC) (mm)16.00
Shank Diameter (DCON) (Decimal Inch)0.6299
Shank Diameter (DCON) (mm)16.00
Length of Cut (APMX) (Decimal Inch)0.7874
Length of Cut (APMX) (mm)20.00
Reach (LU) (Decimal Inch)2.5590
Reach (LU) (mm)65.00
Overall Length (LF) (Decimal Inch)4.5276
Overall Length (LF) (mm)115.00
Neck Diameter (DN) (Decimal Inch)0.5980
Neck Diameter (DN) (mm)15.19
Shank Length (LS) (Decimal Inch)1.9690
Shank Length (LS) (mm)50.01
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTX (Ti-NAMITE-X)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)41
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.