Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_44_45_Logo.jpg
Series_44_44M_Drawing.jpg
Series_44_TB.jpg
Series_44_45_Logo_Vector.eps

10.00mm Dia, 2 Flute, Square End End Mill - 44525

SERIES: 44S

Ski-Carb

10.00mm Dia, 22.00mm LOC, 10.00mm Shank Dia, 2 Flute, 45 Degree Helix, Uncoated, Series 44S, Ski-Carb, Square End End Mill - 44525

Feature & Benefits

  • Polished ski land with primary and secondary flute wall design minimizes chip interference by directing chips away from secondary flute
  • Circular land allows for increased control at various speed and feed rates ultimately reducing chatter
  • Recommended for materials ≤ 150 Bhn (≤ 7 HRc)

SKU / EDP44525
CategorySolid Round Tools > Milling > High Performance Aluminum End Mills
Min Order Qty1
Series44S
Series DescriptionSki-Carb
High PerformanceYes
End ConfigurationSquare End
Tool LengthRegular
Unit (inch/mm)mm
Number of Flutes2
Primary Workpiece Material(N) Non-Ferrous Materials
Secondary Workpiece MaterialPlastics & Composites
Cutting Diameter (DC) (Decimal Inch)0.3937
Cutting Diameter (DC) (mm)10.00
Shank Diameter (DCON) (Decimal Inch)0.3937
Shank Diameter (DCON) (mm)10.00
Length of Cut (APMX) (Decimal Inch)0.8661
Length of Cut (APMX) (mm)22.00
Overall Length (LF) (Decimal Inch)2.8346
Overall Length (LF) (mm)72.00
Shank Length (LS) (Decimal Inch)1.9680
Shank Length (LS) (mm)49.99
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.00035
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.009
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeWeldon (Drive Flat)
Weldon FlatYes
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)45
Variable HelixNo
Center CuttingYes
Chip BreakerNo
DIN Standard (Shank)DIN 6535 HB

Alternative Products SKU / EDP to 44525
Series_47_TB.jpg

10.00mm Dia, 2 Flute, Square End End Mill - 44592

SGS 10.00mm Dia, 22.00mm LOC, 10.00mm Shank Dia, 2 Flute, 35 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 47M, S-Carb, Square End End Mill - 44592

Series_44_TB.jpg

10.00mm Dia, 2 Flute, Square End End Mill - 44526

SGS 10.00mm Dia, 22.00mm LOC, 10.00mm Shank Dia, 2 Flute, 45 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 44S, Ski-Carb, Square End End Mill - 44526

Series_47_TB.jpg

10.00mm Dia, 2 Flute, Square End End Mill - 44555

SGS 10.00mm Dia, 22.00mm LOC, 10.00mm Shank Dia, 2 Flute, 35 Degree Helix, Uncoated, Series 47M, S-Carb, Square End End Mill - 44555

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.