Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_59_59M_Drawing.jpg
Series_59S_TA.png

16.00mm Dia, 2 Flute, Square End End Mill - 43957

SERIES: 59S

General Application End Mill

16.00mm Dia, 40.00mm LOC, 16.00mm Shank Dia, 2 Flute, 25 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 59S, Square End End Mill - 43957


SKU / EDP43957
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series59S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthRegular
Unit (inch/mm)mm
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.6299
Cutting Diameter (DC) (mm)16.00
Shank Diameter (DCON) (Decimal Inch)0.6299
Shank Diameter (DCON) (mm)16.00
Length of Cut (APMX) (Decimal Inch)1.5748
Length of Cut (APMX) (mm)40.00
Overall Length (LF) (Decimal Inch)4.7244
Overall Length (LF) (mm)120.00
Shank Length (LS) (Decimal Inch)3.1450
Shank Length (LS) (mm)79.88
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)25
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 43957
Series_59S_TC.png

16.00mm Dia, 2 Flute, Square End End Mill - 43937

SGS 16.00mm Dia, 40.00mm LOC, 16.00mm Shank Dia, 2 Flute, 25 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 59S, Square End End Mill - 43937

Series_59S_TN.png

16.00mm Dia, 2 Flute, Square End End Mill - 43927

SGS 16.00mm Dia, 40.00mm LOC, 16.00mm Shank Dia, 2 Flute, 25 Degree Helix, Ti-NAMITE (TiN) Coated, Series 59S, Square End End Mill - 43927

Series_59S_UN.jpg

16.00mm Dia, 2 Flute, Square End End Mill - 43917

SGS 16.00mm Dia, 40.00mm LOC, 16.00mm Shank Dia, 2 Flute, 25 Degree Helix, Uncoated, Series 59S, Square End End Mill - 43917

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.