Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_15B_15MB_Drawing.jpg
Series_15B_TC.png

11/64" Dia, 2 Flute, Ball Nose End Mill - 39670

SERIES: 15B

General Application End Mill - Double-End

11/64" Dia, 0.3120" LOC, 3/16" Shank Dia, 2 Flute, 33 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 15B, Double-End, Ball Nose End Mill - 39670


SKU / EDP39670
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series15B
Series DescriptionGeneral Application End Mill - Double-End
High PerformanceNo
End ConfigurationBall Nose
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.1719
Cutting Diameter (DC) (Fractional Inch)11/64
Cutting Diameter (DC) (mm)4.37
Shank Diameter (DCON) (Decimal Inch)0.1875
Shank Diameter (DCON) (Fractional Inch)3/16
Shank Diameter (DCON) (mm)4.76
Length of Cut (APMX) (Decimal Inch)0.3120
Length of Cut (APMX) (mm)7.92
Overall Length (LF) (Decimal Inch)2.0000
Overall Length (LF) (Fractional Inch)2
Overall Length (LF) (mm)50.80
Shank Length (LS) (Decimal Inch)1.6880
Shank Length (LS) (mm)42.88
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiCN (Ti-NAMITE-C)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)33
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 39670
Series_15B_TA.png

11/64" Dia, 2 Flute, Ball Nose End Mill - 31346

SGS 11/64" Dia, 0.3120" LOC, 3/16" Shank Dia, 2 Flute, 33 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 15B, Double-End, Ball Nose End Mill - 31346

Series_15B_TN.png

11/64" Dia, 2 Flute, Ball Nose End Mill - 31560

SGS 11/64" Dia, 0.3120" LOC, 3/16" Shank Dia, 2 Flute, 33 Degree Helix, Ti-NAMITE (TiN) Coated, Series 15B, Double-End, Ball Nose End Mill - 31560

Series_15B_UN.jpg

11/64" Dia, 2 Flute, Ball Nose End Mill - 31520

SGS 11/64" Dia, 0.3120" LOC, 3/16" Shank Dia, 2 Flute, 33 Degree Helix, Uncoated, Series 15B, Double-End, Ball Nose End Mill - 31520

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.