Product Browser - Kyocera SGS Europe
Product Browser - Kyocera SGS Europe

Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Logo.jpg
Series_Z5CR_Z5MCR_Drawing.jpg
Series_Z5CR_TM.jpg
Series_Z5TM_Logo_Vector.eps
Z-Carb-HPR_Action.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

1" Dia, 5 Flute, Corner Radius End Mill - 38880

SERIES: Z5C

Z-Carb-HPR

1" Dia, 2" LOC, 1" Shank Dia, 0.0100" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 38880

Feature & Benefits

  • An ideal balance of helix, indexing, flute depth, rake and relief
  • Variable indexing for chatter supression and patented edge geometry for shearing and strength
  • Chatter-free geometry allows deep cutting and high speed machining
  • Enhanced corner geometry with tight tolerance corner radii
  • Excels at roughing, ramping, high speed machining and finishing in a variety of materials
SKU / EDP38880
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5C
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthLong
Unit (inch/mm)inch
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)1.0000
Cutting Diameter (DC) (Fractional Inch)1
Cutting Diameter (DC) (mm)25.40
Shank Diameter (DCON) (Decimal Inch)1.0000
Shank Diameter (DCON) (Fractional Inch)1
Shank Diameter (DCON) (mm)25.40
Length of Cut (APMX) (Decimal Inch)2.0000
Length of Cut (APMX) (Fractional Inch)2
Length of Cut (APMX) (mm)50.80
Overall Length (LF) (Decimal Inch)4.5000
Overall Length (LF) (Fractional Inch)4-1/2
Overall Length (LF) (mm)114.30
Corner Radius (RE) (Decimal Inch)0.0100
Corner Radius (RE) (mm)0.25
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.3500
Non-Cutting Center Diameter (NCD) (mm)8.89
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTM (Ti-NAMITE-M)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerNo
Alternative Products SKU / EDP to 38880
Series_Z5CR_TA.jpg

1" Dia, 5 Flute, Corner Radius End Mill - 38881

SGS 1" Dia, 2" LOC, 1" Shank Dia, 0.0100" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 38881

Series_Z5CR_TA.jpg

1" Dia, 5 Flute, Corner Radius End Mill - 38883

SGS 1" Dia, 2" LOC, 1" Shank Dia, 0.0100" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 38883

Series_Z5_IC_TA.png

1" Dia, 5 Flute, Corner Radius End Mill - 38885

SGS 1" Dia, 2" LOC, 1" Shank Dia, 0.0100" Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 38885

Series_Z5CR_TM.jpg

1" Dia, 5 Flute, Corner Radius End Mill - 38882

SGS 1" Dia, 2" LOC, 1" Shank Dia, 0.0100" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 38882

Product enquiry form

FUTURE CRM FORM HERE