Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_3CR_Drawing.jpg
Series_3CR_TN.jpg

1" Dia, 2 Flute, Corner Radius End Mill - 38314

SERIES: 03C

General Application End Mill

1" Dia, 1-1/2" LOC, 1" Shank Dia, 0.1250" Radius, 2 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 03C, Corner Radius End Mill - 38314

Feature & Benefits

  • Weldon Flat

SKU / EDP38314
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series03C
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationCorner Radius
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)1.0000
Cutting Diameter (DC) (Fractional Inch)1
Cutting Diameter (DC) (mm)25.40
Shank Diameter (DCON) (Decimal Inch)1.0000
Shank Diameter (DCON) (Fractional Inch)1
Shank Diameter (DCON) (mm)25.40
Length of Cut (APMX) (Decimal Inch)1.5000
Length of Cut (APMX) (Fractional Inch)1-1/2
Length of Cut (APMX) (mm)38.10
Overall Length (LF) (Decimal Inch)4.0000
Overall Length (LF) (Fractional Inch)4
Overall Length (LF) (mm)101.60
Corner Radius (RE) (Decimal Inch)0.1250
Corner Radius (RE) (mm)3.18
Shank Length (LS) (Decimal Inch)1.7000
Shank Length (LS) (mm)43.18
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeWeldon (Drive Flat)
Weldon FlatYes
Coolant OptionExternal Coolant
Coating DescriptionTiN (Ti-NAMITE)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 38314
Series_3CR_TA.jpg

1" Dia, 2 Flute, Corner Radius End Mill - 38398

SGS 1" Dia, 1-1/2" LOC, 1" Shank Dia, 0.1250" Radius, 2 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 03C, Corner Radius End Mill - 38398

Series_3CR_TC.jpg

1" Dia, 2 Flute, Corner Radius End Mill - 38356

SGS 1" Dia, 1-1/2" LOC, 1" Shank Dia, 0.1250" Radius, 2 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 03C, Corner Radius End Mill - 38356

Series_3CR_UN.jpg

1" Dia, 2 Flute, Corner Radius End Mill - 38313

SGS 1" Dia, 1-1/2" LOC, 1" Shank Dia, 0.1250" Radius, 2 Flute, 30 Degree Helix, Uncoated, Series 03C, Corner Radius End Mill - 38313

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.