Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_1CR_1MCR_Drawing.jpg
Series_1CR_UN.jpg

3/8" Dia, 4 Flute, Corner Radius End Mill - 38049

SERIES: 01C

General Application End Mill

3/8" Dia, 1" LOC, 3/8" Shank Dia, 0.0300" Radius, 4 Flute, 30 Degree Helix, Uncoated, Series 01C, Corner Radius End Mill - 38049

Feature & Benefits

  • Weldon Flat

SKU / EDP38049
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series01C
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationCorner Radius
Tool LengthRegular
Unit (inch/mm)inch
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.3750
Cutting Diameter (DC) (Fractional Inch)3/8
Cutting Diameter (DC) (mm)9.53
Shank Diameter (DCON) (Decimal Inch)0.3750
Shank Diameter (DCON) (Fractional Inch)3/8
Shank Diameter (DCON) (mm)9.53
Length of Cut (APMX) (Decimal Inch)1.0000
Length of Cut (APMX) (Fractional Inch)1
Length of Cut (APMX) (mm)25.40
Overall Length (LF) (Decimal Inch)2.5000
Overall Length (LF) (Fractional Inch)2-1/2
Overall Length (LF) (mm)63.50
Corner Radius (RE) (Decimal Inch)0.0300
Corner Radius (RE) (mm)0.76
Shank Length (LS) (Decimal Inch)1.5000
Shank Length (LS) (Fractional Inch)1-1/2
Shank Length (LS) (mm)38.10
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeWeldon (Drive Flat)
Weldon FlatYes
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 38049
Series_1CR_TA.png

3/8" Dia, 4 Flute, Corner Radius End Mill - 38172

SGS 3/8" Dia, 1" LOC, 3/8" Shank Dia, 0.0300" Radius, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 01C, Corner Radius End Mill - 38172

Series_1CR_TC.png

3/8" Dia, 4 Flute, Corner Radius End Mill - 38130

SGS 3/8" Dia, 1" LOC, 3/8" Shank Dia, 0.0300" Radius, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 01C, Corner Radius End Mill - 38130

Series_1CR_TN.png

3/8" Dia, 4 Flute, Corner Radius End Mill - 38050

SGS 3/8" Dia, 1" LOC, 3/8" Shank Dia, 0.0300" Radius, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 01C, Corner Radius End Mill - 38050

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.