Product Browser - Kyocera SGS Europe
Product Browser - Kyocera SGS Europe

Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Logo.jpg
Z5LC_RCH_TM.jpg
Z5CLR_Diagram.jpg
Z-Carb-HPR_Action_Reach.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

5/8" Dia, 5 Flute, Corner Radius End Mill - 37916

SERIES: Z5C

Z-Carb-HPR

5/8" Dia, 1-1/4" LOC, 2-1/2" Reach, 5/8" Shank Dia, 0.1200" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37916

Feature & Benefits

  • Positive Radial Rake
  • Variable Flute Pattern
  • Open Center Design
  • Long Reach
SKU / EDP37916
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5C
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthLong Reach Neck
Unit (inch/mm)inch
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.6250
Cutting Diameter (DC) (Fractional Inch)5/8
Cutting Diameter (DC) (mm)15.88
Shank Diameter (DCON) (Decimal Inch)0.6250
Shank Diameter (DCON) (Fractional Inch)5/8
Shank Diameter (DCON) (mm)15.88
Length of Cut (APMX) (Decimal Inch)1.2500
Length of Cut (APMX) (Fractional Inch)1-1/4
Length of Cut (APMX) (mm)31.75
Reach (LU) (Decimal Inch)2.5000
Reach (LU) (Fractional Inch)2-1/2
Reach (LU) (mm)63.50
Overall Length (LF) (Decimal Inch)5.0000
Overall Length (LF) (Fractional Inch)5
Overall Length (LF) (mm)127.00
Neck Diameter (DN) (Decimal Inch)0.5940
Neck Diameter (DN) (mm)15.09
Corner Radius (RE) (Decimal Inch)0.1200
Corner Radius (RE) (mm)3.05
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.2190
Non-Cutting Center Diameter (NCD) (mm)5.56
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTM (Ti-NAMITE-M)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerNo
Alternative Products SKU / EDP to 37916
Z5LC_RCH_TA.jpg

5/8" Dia, 5 Flute, Corner Radius End Mill - 37914

SGS 5/8" Dia, 1-1/4" LOC, 2-1/2" Reach, 5/8" Shank Dia, 0.1200" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37914

Z5LC_RCH_CB_TA.jpg

5/8" Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 37915

SGS 5/8" Dia, 1-1/4" LOC, 2-1/2" Reach, 5/8" Shank Dia, 0.1200" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 37915

Z5LC_RCH_CB_TM.jpg

5/8" Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 37917

SGS 5/8" Dia, 1-1/4" LOC, 2-1/2" Reach, 5/8" Shank Dia, 0.1200" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 37917

Product enquiry form

FUTURE CRM FORM HERE