Product Browser - Kyocera SGS Europe
Product Browser - Kyocera SGS Europe

Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Logo.jpg
Z5CR_LNG_TA.jpg
Z5CECR_Diagram.jpg
Z-Carb-HPR_Action.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

7/16" Dia, 5 Flute, Corner Radius End Mill - 37502

SERIES: Z5C

Z-Carb-HPR

7/16" Dia, 1-5/16" LOC, 7/16" Shank Dia, 0.0300" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37502

Feature & Benefits

  • An ideal balance of helix, indexing, flute depth, rake and relief
  • Variable indexing for chatter supression and patented edge geometry for shearing and strength
  • Chatter-free geometry allows deep cutting and high speed machining
  • Enhanced corner geometry with tight tolerance corner radii
  • Excels at roughing, ramping, high speed machining and finishing in a variety of materials
SKU / EDP37502
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5C
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthLong
Unit (inch/mm)inch
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.4375
Cutting Diameter (DC) (Fractional Inch)7/16
Cutting Diameter (DC) (mm)11.11
Shank Diameter (DCON) (Decimal Inch)0.4375
Shank Diameter (DCON) (Fractional Inch)7/16
Shank Diameter (DCON) (mm)11.11
Length of Cut (APMX) (Decimal Inch)1.3125
Length of Cut (APMX) (Fractional Inch)1-5/16
Length of Cut (APMX) (mm)33.34
Overall Length (LF) (Decimal Inch)3.0000
Overall Length (LF) (Fractional Inch)3
Overall Length (LF) (mm)76.20
Corner Radius (RE) (Decimal Inch)0.0300
Corner Radius (RE) (mm)0.76
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.1530
Non-Cutting Center Diameter (NCD) (mm)3.89
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerNo
Alternative Products SKU / EDP to 37502
Z5CR_LNG_CB_TA.jpg

7/16" Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 37503

SGS 7/16" Dia, 1-5/16" LOC, 7/16" Shank Dia, 0.0300" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 37503

Z5CR_LNG_TM.jpg

7/16" Dia, 5 Flute, Corner Radius End Mill - 37504

SGS 7/16" Dia, 1-5/16" LOC, 7/16" Shank Dia, 0.0300" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37504

Z5CR_LNG_CB_TM.jpg

7/16" Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 37505

SGS 7/16" Dia, 1-5/16" LOC, 7/16" Shank Dia, 0.0300" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 37505

Product enquiry form

FUTURE CRM FORM HERE