Product Browser
If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.
3/8" Dia, 5 Flute, Chip Breaker Square End Mill - 37471
SERIES: Z5S
Z-Carb-HPR
3/8" Dia, 1-1/8" LOC, 3/8" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5S, Z-Carb-HPR, Chip Breaker Square End Mill - 37471
Feature & Benefits
- An ideal balance of helix, indexing, flute depth, rake and relief
- Variable indexing for chatter supression and patented edge geometry for shearing and strength
- Chatter-free geometry allows deep cutting and high speed machining
- Enhanced corner geometry with tight tolerance corner radii
- Excels at roughing, ramping, high speed machining and finishing in a variety of materials
| SKU / EDP | 37471 |
|---|---|
| Category | Solid Round Tools > Milling > High Performance End Mills |
| Min Order Qty | 1 |
| Series | Z5S |
| Series Description | Z-Carb-HPR |
| High Performance | Yes |
| End Configuration | Chip Breaker (Square) |
| Tool Length | Long |
| Unit (inch/mm) | inch |
| Number of Flutes | 5 |
| Primary Workpiece Material | (P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy |
| Secondary Workpiece Material | (H) Hardened Materials |
| Cutting Diameter (DC) (Decimal Inch) | 0.3750 |
| Cutting Diameter (DC) (Fractional Inch) | 3/8 |
| Cutting Diameter (DC) (mm) | 9.53 |
| Shank Diameter (DCON) (Decimal Inch) | 0.3750 |
| Shank Diameter (DCON) (Fractional Inch) | 3/8 |
| Shank Diameter (DCON) (mm) | 9.53 |
| Length of Cut (APMX) (Decimal Inch) | 1.1250 |
| Length of Cut (APMX) (Fractional Inch) | 1-1/8 |
| Length of Cut (APMX) (mm) | 28.58 |
|---|---|
| Overall Length (LF) (Decimal Inch) | 3.0000 |
| Overall Length (LF) (Fractional Inch) | 3 |
| Overall Length (LF) (mm) | 76.20 |
| Non-Cutting Center Diameter (NCD) (Decimal Inch) | 0.1310 |
| Non-Cutting Center Diameter (NCD) (mm) | 3.33 |
| Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.0016 |
| Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.040 |
| Shank Diameter (DCON) Tolerance (ISO) | h6 |
| Shank Type | Straight |
| Weldon Flat | No |
| Coolant Option | External Coolant |
| Coating Description | AlTiN (Ti-NAMITE-A) |
| Additional Geometry | Right Hand Cut Direction (RHC) |
| Rake Angle | Positive |
| Helix Angle | Right Spiral |
| Helix Angle (Degree) | 37 |
| Variable Helix | No |
| Center Cutting | No |
| Chip Breaker | Yes |
Alternative Products SKU / EDP to 37471
3/8" Dia, 5 Flute, Square End End Mill - 37470
SGS 3/8" Dia, 1-1/8" LOC, 3/8" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37470
3/8" Dia, 5 Flute, Square End End Mill - 37472
SGS 3/8" Dia, 1-1/8" LOC, 3/8" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37472
3/8" Dia, 5 Flute, Chip Breaker Square End Mill - 37473
SGS 3/8" Dia, 1-1/8" LOC, 3/8" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5S, Z-Carb-HPR, Chip Breaker Square End Mill - 37473
3/8" Dia, 5 Flute, Square End End Mill - 37470
SGS 3/8" Dia, 1-1/8" LOC, 3/8" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37470
3/8" Dia, 5 Flute, Square End End Mill - 37472
SGS 3/8" Dia, 1-1/8" LOC, 3/8" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37472
3/8" Dia, 5 Flute, Chip Breaker Square End Mill - 37473
SGS 3/8" Dia, 1-1/8" LOC, 3/8" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5S, Z-Carb-HPR, Chip Breaker Square End Mill - 37473
Product enquiry form
FUTURE CRM FORM HERE
