Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Logo.jpg
Z5_LNG_TM.jpg
Z5CECR_Diagram.jpg
Z-Carb-HPR_Action.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

1/8" Dia, 5 Flute, Square End End Mill - 37396

SERIES: Z5S

Z-Carb-HPR

1/8" Dia, 3/8" LOC, 1/8" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37396

Feature & Benefits

  • An ideal balance of helix, indexing, flute depth, rake and relief
  • Variable indexing for chatter supression and patented edge geometry for shearing and strength
  • Chatter-free geometry allows deep cutting and high speed machining
  • Enhanced corner geometry with tight tolerance corner radii
  • Excels at roughing, ramping, high speed machining and finishing in a variety of materials

SKU / EDP37396
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5S
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationSquare End
Tool LengthLong
Unit (inch/mm)inch
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.1250
Cutting Diameter (DC) (Fractional Inch)1/8
Cutting Diameter (DC) (mm)3.18
Shank Diameter (DCON) (Decimal Inch)0.1250
Shank Diameter (DCON) (Fractional Inch)1/8
Shank Diameter (DCON) (mm)3.18
Length of Cut (APMX) (Decimal Inch)0.3750
Length of Cut (APMX) (Fractional Inch)3/8
Length of Cut (APMX) (mm)9.53
Overall Length (LF) (Decimal Inch)2.0000
Overall Length (LF) (Fractional Inch)2
Overall Length (LF) (mm)50.80
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.0440
Non-Cutting Center Diameter (NCD) (mm)1.12
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0012
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.030
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTM (Ti-NAMITE-M)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerNo

Alternative Products SKU / EDP to 37396
Z5_LNG_TA.jpg

1/8" Dia, 5 Flute, Square End End Mill - 37394

SGS 1/8" Dia, 3/8" LOC, 1/8" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37394

Z5_LNG_CB_TA.jpg

1/8" Dia, 5 Flute, Chip Breaker Square End Mill - 37395

SGS 1/8" Dia, 3/8" LOC, 1/8" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5S, Z-Carb-HPR, Chip Breaker Square End Mill - 37395

Z5_LNG_CB_TM.jpg

1/8" Dia, 5 Flute, Chip Breaker Square End Mill - 37397

SGS 1/8" Dia, 3/8" LOC, 1/8" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5S, Z-Carb-HPR, Chip Breaker Square End Mill - 37397

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.