Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

https://www.youtube.com/watch?v=ZWBNmTkeSIg

https://www.youtube.com/watch?v=0BKU7y6XSvg

https://www.youtube.com/watch?v=OnYJYzFgKwI

5/8" Dia, 5 Flute, Corner Radius End Mill - 37261

SERIES: Z5C

Z-Carb-HPR

5/8" Dia, 3/4" LOC, 5/8" Shank Dia, 0.0150" Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37261

Feature & Benefits

An ideal balance of helix, indexing, flute depth, rake and relief
Variable indexing for chatter supression and patented edge geometry for shearing and strength
Chatter-free geometry allows deep cutting and high speed machining
Central coolant hole delivers coolant effectively to the cutting zone enhancing chip removal when pocketing or slotting
Enhanced corner geometry with tight tolerance corner radii
Excels at roughing, ramping, high speed machining and finishing in a variety of materials

SKU / EDP	37261
Category	Solid Round Tools > Milling > High Performance End Mills
Min Order Qty	1
Series	Z5C
Series Description	Z-Carb-HPR
High Performance	Yes
End Configuration	Corner Radius
Tool Length	Stub
Unit (inch/mm)	inch
Number of Flutes	5
Primary Workpiece Material	(P) Steel\|(M) Stainless Steel\|(K) Cast Iron\|(S) High Temp Alloy
Secondary Workpiece Material	(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)	0.6250
Cutting Diameter (DC) (Fractional Inch)	5/8
Cutting Diameter (DC) (mm)	15.88
Shank Diameter (DCON) (Decimal Inch)	0.6250
Shank Diameter (DCON) (Fractional Inch)	5/8
Shank Diameter (DCON) (mm)	15.88
Length of Cut (APMX) (Decimal Inch)	0.7500
Length of Cut (APMX) (Fractional Inch)	3/4
Length of Cut (APMX) (mm)	19.05
Overall Length (LF) (Decimal Inch)	3.5000
Overall Length (LF) (Fractional Inch)	3-1/2
Overall Length (LF) (mm)	88.90

Corner Radius (RE) (Decimal Inch)	0.0150
Corner Radius (RE) (mm)	0.38
Shank Length (LS) (Decimal Inch)	2.7500
Shank Length (LS) (Fractional Inch)	2-3/4
Shank Length (LS) (mm)	69.85
Non-Cutting Center Diameter (NCD) (Decimal Inch)	0.2190
Non-Cutting Center Diameter (NCD) (mm)	5.56
Cutting Diameter (DC) Tolerance (Decimal Inch)	+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)	+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)	h6
Corner Radius (RE) Tolerance (Decimal Inch)	+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)	+0.000/-0.050
Shank Type	Straight
Weldon Flat	No
Coolant Option	Internal Coolant
Coating Description	TM (Ti-NAMITE-M)
Additional Geometry	Right Hand Cut Direction (RHC)
Rake Angle	Positive
Helix Angle	Right Spiral
Helix Angle (Degree)	37
Variable Helix	No
Center Cutting	No
Chip Breaker	No

Alternative Products SKU / EDP to 37261

5/8" Dia, 5 Flute, Corner Radius End Mill - 38545

SGS 5/8" Dia, 3/4" LOC, 5/8" Shank Dia, 0.0150" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 38545

5/8" Dia, 5 Flute, Corner Radius End Mill - 38590

SGS 5/8" Dia, 3/4" LOC, 5/8" Shank Dia, 0.0150" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 38590

5/8" Dia, 5 Flute, Corner Radius End Mill - 38623

SGS 5/8" Dia, 3/4" LOC, 5/8" Shank Dia, 0.0150" Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 38623

5/8" Dia, 5 Flute, Corner Radius End Mill - 37061

SGS 5/8" Dia, 3/4" LOC, 5/8" Shank Dia, 0.0150" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37061

5/8" Dia, 5 Flute, Corner Radius End Mill - 37068

SGS 5/8" Dia, 3/4" LOC, 5/8" Shank Dia, 0.0150" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37068